Module:IP/doc

This is the documentation page for Module:IP

This module is subject to page protection. It is a highly visible module in use by a very large number of pages, or is substituted very frequently. Because vandalism or mistakes would affect many pages, and even trivial editing might cause substantial load on the servers, it is protected from editing.

Module:IP is a library for working with IP addresses and subnets. It can handle both IPv4 and IPv6. The library exports four classes, IPAddress, Subnet, IPv4Collection, and IPv6Collection.

Loading the library Edit

local IP = require('Module:IP')
local IPAddress = IP.IPAddress
local Subnet = IP.Subnet

IPAddress Edit

The IPAddress class is used to work with single IP addresses. To create a new IPAddress object:

local ipAddress = IPAddress.new(ipString)

The ipString variable can be a valid IPv4 or IPv6 address.

Examples:

local ipv4Address = IPAddress.new('1.2.3.4')
local ipv6Address = IPAddress.new('2001:db8::ff00:12:3456')

IPAddress objects can be compared with relational operators:

-- Equality
IPAddress.new('1.2.3.4') == IPAddress.new('1.2.3.4') -- true
IPAddress.new('1.2.3.4') == IPAddress.new('1.2.3.5') -- false

-- Less than / greater than
IPAddress.new('1.2.3.4') < IPAddress.new('1.2.3.5')  -- true
IPAddress.new('1.2.3.4') > IPAddress.new('1.2.3.5')  -- false
IPAddress.new('1.2.3.4') <= IPAddress.new('1.2.3.5') -- true
IPAddress.new('1.2.3.4') <= IPAddress.new('1.2.3.4') -- true

You can use tostring on them (this is equivalent to using getIP):

tostring(IPAddress.new('1.2.3.4'))                -- "1.2.3.4"
tostring(IPAddress.new('2001:db8::ff00:12:3456')) -- "2001:db8::ff00:12:3456"

-- Expanded IPv6 addresses are abbreviated:
tostring(IPAddress.new('2001:db8:0:0:0:0:0:0'))   -- "2001:db8::"

You can also concatenate them:

IPAddress.new('1.2.3.4') .. ' foo'                   -- "1.2.3.4 foo"
IPAddress.new('1.2.3.4') .. IPAddress.new('5.6.7.8') -- "1.2.3.45.6.7.8"

IPAddress objects have several methods, outlined below.

getIP Edit

ipAddress:getIP()

Returns a string representation of the IP address. IPv6 addresses are abbreviated if possible.

Examples:

IPAddress.new('1.2.3.4'):getIP()                -- "1.2.3.4"
IPAddress.new('2001:db8::ff00:12:3456'):getIP() -- "2001:db8::ff00:12:3456"
IPAddress.new('2001:db8:0:0:0:0:0:0'):getIP()   -- "2001:db8::"

getVersion Edit

ipAddress:getVersion()

Returns the version of the IP protocol being used. This is "IPv4" for IPv4 addresses, and "IPv6" for IPv6 addresses.

Examples:

IPAddress.new('1.2.3.4'):getVersion()                -- "IPv4"
IPAddress.new('2001:db8::ff00:12:3456'):getVersion() -- "IPv6"

isIPv4 Edit

ipAddress:isIPv4()

Returns true if the IP address is an IPv4 address, and false otherwise.

Examples:

IPAddress.new('1.2.3.4'):isIPv4()                -- true
IPAddress.new('2001:db8::ff00:12:3456'):isIPv4() -- false

isIPv6 Edit

ipAddress:isIPv6()

Returns true if the IP address is an IPv6 address, and false otherwise.

Examples:

IPAddress.new('1.2.3.4'):isIPv6()                -- false
IPAddress.new('2001:db8::ff00:12:3456'):isIPv6() -- true

isInSubnet Edit

ipAddress:isInSubnet(subnet)

Returns true if the IP address is in the subnet subnet, and false otherwise. subnet may be a Subnet object or a CIDR string.

Examples:

IPAddress.new('1.2.3.4'):isInSubnet('1.2.3.0/24')                             -- true
IPAddress.new('1.2.3.4'):isInSubnet('1.2.4.0/24')                             -- false
IPAddress.new('1.2.3.4'):isInSubnet(Subnet.new('1.2.3.0/24'))                 -- true
IPAddress.new('2001:db8::ff00:12:3456'):isInSubnet('2001:db8::ff00:12:0/112') -- true

getSubnet Edit

ipAddress:getSubnet(bitLength)

Returns a Subnet object for the subnet with a bit length of bitLength which contains the current IP. The bitLength parameter must be an integer between 0 and 32 for IPv4 addresses, or an integer between 0 and 128 for IPv6 addresses.

Examples:

IPAddress.new('1.2.3.4'):getSubnet(24) -- Equivalent to Subnet.new('1.2.3.0/24')

getNextIP Edit

ipAddress:getNextIP()

Returns a new IPAddress object equivalent to the current IP address incremented by one. The IPv4 address "255.255.255.255" rolls around to "0.0.0.0", and the IPv6 address "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff" rolls around to "::".

Examples:

IPAddress.new('1.2.3.4'):getNextIP()                -- Equivalent to IPAddress.new('1.2.3.5')
IPAddress.new('2001:db8::ff00:12:3456'):getNextIP() -- Equivalent to IPAddress.new('2001:db8::ff00:12:3457')
IPAddress.new('255.255.255.255'):getNextIP()        -- Equivalent to IPAddress.new('0.0.0.0')

getPreviousIP Edit

ipAddress:getPreviousIP()

Returns a new IPAddress object equivalent to the current IP address decremented by one. The IPv4 address "0.0.0.0" rolls around to "255.255.255.255", and the IPv6 address "::" rolls around to "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff".

Examples:

IPAddress.new('1.2.3.4'):getPreviousIP()                -- Equivalent to IPAddress.new('1.2.3.3')
IPAddress.new('2001:db8::ff00:12:3456'):getPreviousIP() -- Equivalent to IPAddress.new('2001:db8::ff00:12:3455')
IPAddress.new('0.0.0.0'):getPreviousIP()                -- Equivalent to IPAddress.new('255.255.255.255')

Subnet Edit

The Subnet class is used to work with subnetworks of IPv4 or IPv6 addresses. To create a new Subnet object:

local subnet = Subnet.new(cidrString)

cidrString must be a valid IPv4 or IPv6 CIDR string.

Subnet objects can be compared for equality:

Subnet.new('1.2.3.0/24') == Subnet.new('1.2.3.0/24')                           -- true
Subnet.new('1.2.3.0/24') == Subnet.new('1.2.3.0/25')                           -- false
Subnet.new('1.2.3.0/24') == Subnet.new('2001:db8::ff00:12:0/112')              -- false
Subnet.new('2001:db8::ff00:12:0/112') == Subnet.new('2001:db8::ff00:12:0/112') -- true
Subnet.new('2001:db8:0:0:0:0:0:0/112') == Subnet.new('2001:db8::/112')         -- true

You can use tostring on them (this is equivalent to getCIDR):

tostring(Subnet.new('1.2.3.0/24'))               -- "1.2.3.0/24"
tostring(Subnet.new('2001:db8::ff00:12:0/112'))  -- "2001:db8::ff00:12:0/112"
tostring(Subnet.new('2001:db8:0:0:0:0:0:0/112')) -- "2001:db8::/112"

You can also concatenate them:

Subnet.new('1.2.3.0/24') .. ' foo'                   -- "1.2.3.0/24 foo"
Subnet.new('1.2.3.0/24') .. Subnet.new('4.5.6.0/24') -- "1.2.3.0/244.5.6.0/24"

Subnet objects have several methods, outlined below.

getPrefix Edit

subnet:getPrefix()

Returns an IPAddress object for the lowest IP address in the subnet.

Examples:

Subnet.new('1.2.3.0/24'):getPrefix()              -- Equivalent to IPAddress.new('1.2.3.0')
Subnet.new('2001:db8::ff00:12:0/112'):getPrefix() -- Equivalent to IPAddress.new('2001:db8::ff00:12:0')

getHighestIP Edit

subnet:getHighestIP()

Returns an IPAddress object for the highest IP address in the subnet.

Examples:

Subnet.new('1.2.3.0/24'):getHighestIP()              -- Equivalent to IPAddress.new('1.2.3.255')
Subnet.new('2001:db8::ff00:12:0/112'):getHighestIP() -- Equivalent to IPAddress.new('2001:db8::ff00:12:ffff')

getBitLength Edit

subnet:getBitLength()

Returns the bit length of the subnet. This is an integer between 0 and 32 for IPv4 addresses, or an integer between 0 and 128 for IPv6 addresses.

Examples:

Subnet.new('1.2.3.0/24'):getBitLength()              -- 24
Subnet.new('2001:db8::ff00:12:0/112'):getBitLength() -- 112

getCIDR Edit

subnet:getCIDR()

Returns a CIDR string representation of the subnet.

Examples:

Subnet.new('1.2.3.0/24'):getCIDR()               -- "1.2.3.0/24"
Subnet.new('2001:db8::ff00:12:0/112'):getCIDR()  -- "2001:db8::ff00:12:0/112"
Subnet.new('2001:db8:0:0:0:0:0:0/112'):getCIDR() -- "2001:db8::/112"

getVersion Edit

subnet:getVersion()

Returns the version of the IP protocol being used. This is "IPv4" for IPv4 addresses, and "IPv6" for IPv6 addresses.

Examples:

Subnet.new('1.2.3.0/24'):getVersion()              -- "IPv4"
Subnet.new('2001:db8::ff00:12:0/112'):getVersion() -- "IPv6"

isIPv4 Edit

subnet:isIPv4()

Returns true if the subnet is using IPv4, and false otherwise.

Examples:

Subnet.new('1.2.3.0/24'):isIPv4()              -- true
Subnet.new('2001:db8::ff00:12:0/112'):isIPv4() -- false

isIPv6 Edit

subnet:isIPv6()

Returns true if the subnet is using IPv6, and false otherwise.

Examples:

Subnet.new('1.2.3.0/24'):isIPv6()              -- false
Subnet.new('2001:db8::ff00:12:0/112'):isIPv6() -- true

containsIP Edit

subnet:containsIP(ip)

Returns true if the subnet contains the IP address ip, and false otherwise. ip can be an IP address string, or an IPAddress object.

Examples:

Subnet.new('1.2.3.0/24'):containsIP('1.2.3.4')                             -- true
Subnet.new('1.2.3.0/24'):containsIP('1.2.4.4')                             -- false
Subnet.new('1.2.3.0/24'):containsIP(IPAddress.new('1.2.3.4'))              -- true
Subnet.new('2001:db8::ff00:12:0/112'):containsIP('2001:db8::ff00:12:3456') -- true

overlapsSubnet Edit

subnet:overlapsSubnet(subnet)

Returns true if the current subnet overlaps with subnet, and false otherwise. subnet can be a CIDR string or a subnet object.

Examples:

Subnet.new('1.2.3.0/24'):overlapsSubnet('1.2.0.0/16')                         -- true
Subnet.new('1.2.3.0/24'):overlapsSubnet('1.2.12.0/22')                        -- false
Subnet.new('1.2.3.0/24'):overlapsSubnet(Subnet.new('1.2.0.0/16'))             -- true
Subnet.new('2001:db8::ff00:12:0/112'):overlapsSubnet('2001:db8::ff00:0:0/96') -- true

walk Edit

subnet:walk()

The walk method iterates over all of the IPAddress objects in the subnet.

Examples:

for ipAddress in Subnet.new('192.168.0.0/30'):walk() do
	mw.log(tostring(ipAddress))
end
-- 192.168.0.0
-- 192.168.0.1
-- 192.168.0.2
-- 192.168.0.3

IPv4Collection Edit

The IPv4Collection class is used to work with several different IPv4 addresses and IPv4 subnets. To create a new IPv4Collection object:

local collection = IPv4Collection.new()

IPv4Collection objects have several methods, outlined below.

getVersion Edit

collection:getVersion()

Returns the string "IPv4".

addIP Edit

collection:addIP(ip)

Adds an IP to the collection. The IP can be either a string or an IPAddress object.

Examples:

collection:addIP('1.2.3.4')
collection:addIP(IPAddress.new('1.2.3.4'))

This method is chainable:

collection:addIP('1.2.3.4'):addIP('5.6.7.8')

addSubnet Edit

collection:addSubnet(subnet)

Adds a subnet to the collection. The subnet can be either a CIDR string or a Subnet object.

Examples:

collection:addSubnet('1.2.3.0/24')
collection:addSubnet(Subnet.new('1.2.3.0/24'))

This method is chainable:

collection:addSubnet('1.2.0.0/24'):addSubnet('1.2.1.0/24')

addFromString Edit

collection:addFromString(str)

Extracts any IPv4 addresses and IPv4 CIDR subnets from str and adds them to the collection. Any text that is not an IPv4 address or CIDR subnet is ignored.

Examples:

collection:addFromString('Add some IPs and subnets: 1.2.3.4 1.2.3.5 2001:0::f foo 1.2.4.0/24')

This method is chainable:

collection:addFromString('foo 1.2.3.4'):addFromString('bar 5.6.7.8')

containsIP Edit

collection:containsIP(ip)

Returns true if the collection contains the specified IP; otherwise returns false. The ip parameter can be a string or an IPAddress object.

Examples:

collection:containsIP('1.2.3.4')
collection:containsIP(IPAddress.new('1.2.3.4'))

getRanges Edit

collection:getRanges()

Returns a sorted array of IP pairs equivalent to the collection. Each IP pair is an array representing a contiguous range of IP addresses from pair[1] to pair[2] inclusive. pair[1] and pair[2] are IPAddress objects.

Examples:

collection:addSubnet('1.2.0.0/24')
collection:addSubnet('1.2.1.0/24')
collection:addSubnet('1.2.10.0/24')
mw.logObject(collection:getRanges())
-- Logs the following:
-- table#1 {
--   table#2 {
--     1.2.0.0,
--     1.2.1.255,
--   },
--   table#3 {
--     1.2.10.0,
--     1.2.10.255,
--   },
-- }

overlapsSubnet Edit

collection:overlapsSubnet(subnet)

Returns true, obj if subnet overlaps this collection, where obj is the first IPAddress or Subnet object overlapping the subnet. Otherwise, returns false. subnet can be a CIDR string or a Subnet object.

Examples:

collection:addIP('1.2.3.4')
collection:overlapsSubnet('1.2.3.0/24') -- true, IPAddress.new('1.2.3.4')
collection:overlapsSubnet('1.2.4.0/24') -- false

IPv6Collection Edit

The IPv6Collection class is used to work with several different IPv6 addresses and IPv6 subnets. IPv6Collection objects are directly analagous to IPv4Collection objects: they contain the same methods and work the same way, but all IP addresses and subnets added to it must be IPv6, not IPv4.

To create a new IPv6Collection object:

local collection = IPv6Collection.new()