Template:Infobox settlement/doc

From Omniversalis

This template is aliased or used as a sub-template for several infobox front-end templates. It should be used to produce an Infobox for human settlements (cities, towns, villages, communities) as well as other administrative districts, counties, provinces, et cetera—in fact, any subdivision below the level of a country, for which {{Infobox country}} should be used. Parameters are described in the table below. For questions, see the talk page. For a U.S. city guideline, see WP:USCITIES.

Usage[edit]

  • Important: Please enter all numeric values in a raw, unformatted fashion. References are to be included in their respective section footnotes field. Numeric values that are not "raw" may create an "Expression error". Raw values will be automatically formatted by the template. If you find a raw value is not formatted in your usage of the template, please post a notice on the discussion page for this template.
  • An expression error may also occur when any coordinate parameter has a value, but one or more coordinate parameters are blank or invalid.

Basic blank template, ready to cut and paste. See the next section for a copy of the template with all parameters and comments. See the table below that for a full description of each parameter.

Using metric units[edit]

{{Infobox settlement
| name                    = 
| native_name             = 
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| settlement_type         = 
| image_skyline           = 
| image_alt               = 
| image_caption           = 
| image_flag              = 
| flag_alt                = 
| image_seal              = 
| seal_alt                = 
| image_shield            = 
| shield_alt              = 
| etymology               = 
| nickname                = 
| motto                   = 
| image_map               = 
| map_alt                 = 
| map_caption             = 
| pushpin_map             = 
| pushpin_map_alt         = 
| pushpin_map_caption     = 
| pushpin_label_position  = 
| coordinates             = <!-- {{coord|latitude|longitude|type:city|display=inline,title}} -->
| coor_pinpoint           = 
| coordinates_footnotes   = 
| subdivision_type        = Country
| subdivision_name        = 
| subdivision_type1       = 
| subdivision_name1       = 
| subdivision_type2       = 
| subdivision_name2       = 
| subdivision_type3       = 
| subdivision_name3       = 
| established_title       = 
| established_date        = 
| founder                 = 
| seat_type               = 
| seat                    = 
| government_footnotes    = 
| government_type         = 
| governing_body          = 
| leader_party            = 
| leader_title            = 
| leader_name             = 
| leader_title1           = 
| leader_name1            = 
| leader_title2           = 
| leader_name2            = 
| leader_title3           = 
| leader_name3            = 
| leader_title4           = 
| leader_name4            = 
| unit_pref               = Metric
<!-- ALL fields with measurements have automatic unit conversion -->
<!-- for references: use <ref> tags -->
| area_footnotes          = 
| area_urban_footnotes    = <!-- <ref> </ref> -->
| area_rural_footnotes    = <!-- <ref> </ref> -->
| area_metro_footnotes    = <!-- <ref> </ref> -->
| area_magnitude          = <!-- <ref> </ref> -->
| area_note               = 
| area_water_percent      = 
| area_rank               = 
| area_blank1_title       = 
| area_blank2_title       = 
<!-- square kilometers -->
| area_total_km2          = 
| area_land_km2           = 
| area_water_km2          = 
| area_urban_km2          = 
| area_rural_km2          = 
| area_metro_km2          = 
| area_blank1_km2         = 
| area_blank2_km2         = 
<!-- hectares -->
| area_total_ha           = 
| area_land_ha            = 
| area_water_ha           = 
| area_urban_ha           = 
| area_rural_ha           = 
| area_metro_ha           = 
| area_blank1_ha          = 
| area_blank2_ha          = 
| length_km               = 
| width_km                = 
| dimensions_footnotes    = 
| elevation_footnotes     = 
| elevation_m             = 
| population_footnotes    = 
| population_as_of        = 
| population_total        = 
| population_density_km2  = auto
| population_note         = 
| population_demonym      = 
| timezone1               = 
| utc_offset1             = 
| timezone1_DST           = 
| utc_offset1_DST         = 
| postal_code_type        = 
| postal_code             = 
| area_code_type          = 
| area_code               = 
| iso_code                = 
| website                 = <!-- {{URL|example.com}} -->
| footnotes               = 
}}

Using non-metric units[edit]

{{Infobox settlement
| name                    = 
| native_name             = 
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| settlement_type         = 
| image_skyline           = 
| image_alt               = 
| image_caption           = 
| image_flag              = 
| flag_alt                = 
| image_seal              = 
| seal_alt                = 
| image_shield            = 
| shield_alt              = 
| etymology               = 
| nickname                = 
| motto                   = 
| image_map               = 
| map_alt                 = 
| map_caption             = 
| pushpin_map             = 
| pushpin_map_alt         = 
| pushpin_map_caption     = 
| pushpin_label_position  = 
| coordinates             =  <!-- {{coord|latitude|longitude|type:city|display=inline,title}} -->
| coor_pinpoint           = 
| coordinates_footnotes   = 
| subdivision_type        = Country
| subdivision_name        = 
| subdivision_type1       = 
| subdivision_name1       = 
| subdivision_type2       = 
| subdivision_name2       = 
| subdivision_type3       = 
| subdivision_name3       = 
| established_title       = 
| established_date        = 
| founder                 = 
| seat_type               = 
| seat                    = 
| government_footnotes    = 
| leader_party            = 
| leader_title            = 
| leader_name             = 
| unit_pref               = US<!-- or UK -->
<!-- ALL fields with measurements have automatic unit conversion -->
<!-- for references: use <ref> tags -->
| area_footnotes          = 
| area_urban_footnotes    = <!-- <ref> </ref> -->
| area_rural_footnotes    = <!-- <ref> </ref> -->
| area_metro_footnotes    = <!-- <ref> </ref> -->
| area_magnitude          = <!-- use only to set a special wikilink -->
| area_note               = 
| area_water_percent      = 
| area_rank               = 
| area_blank1_title       = 
| area_blank2_title       = 
<!-- square miles -->
| area_total_sq_mi        = 
| area_land_sq_mi         = 
| area_water_sq_mi        = 
| area_urban_sq_mi        = 
| area_rural_sq_mi        = 
| area_metro_sq_mi        = 
| area_blank1_sq_mi       = 
| area_blank2_sq_mi       = 
<!-- acres -->
| area_total_acre         = 
| area_land_acre          = 
| area_water_acre         = 
| area_urban_acre         = 
| area_rural_acre         = 
| area_metro_acre         = 
| area_blank1_acre        = 
| area_blank2_acre        = 
| length_mi               = 
| width_mi                = 
| dimensions_footnotes    = 
| elevation_footnotes     = 
| elevation_ft            = 
| population_footnotes    = 
| population_as_of        = 
| population_total        = 
| population_density_sq_mi= auto
| population_note         = 
| population_demonym      = 
| timezone1               = 
| utc_offset1             = 
| timezone1_DST           = 
| utc_offset1_DST         = 
| postal_code_type        = 
| postal_code             = 
| area_code_type          = 
| area_code               = 
| iso_code                = 
| website                 = <!-- {{URL|example.com}} -->
| footnotes               = 
}}

Short version[edit]

{{Infobox settlement
| name                    = 
| native_name             = 
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| settlement_type         = 
| image_skyline           = 
| image_alt               = 
| image_caption           = 
| etymology               = 
| nickname                = 
| coordinates             = <!-- {{Coord}} -->
| population_total        = 
| subdivision_type        = Country
| subdivision_name        = 
| subdivision_type1       = 
| subdivision_name1       = 
| subdivision_type2       = 
| subdivision_name2       = 
| website                 = <!-- {{URL|example.com}} -->
}}

Complete empty syntax, with comments[edit]

This copy of the template lists all parameters except for some of the repeating numbered parameters which are noted in the comments. Comments here should be brief; see the table below for full descriptions of each parameter.

{{Infobox settlement
| name                    = <!-- at least one of the first two fields must be filled in -->
| official_name            =
| native_name             = <!-- if different from the English name -->
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| other_name              =
| settlement_type         = <!-- such as Town, Village, City, Borough etc. -->
<!-- transliteration(s) -->
| translit_lang1          =
| translit_lang1_type     =
| translit_lang1_info     =
| translit_lang1_type1    =
| translit_lang1_info1    =
| translit_lang1_type2    =
| translit_lang1_info2    = <!-- etc., up to translit_lang1_type6 / translit_lang1_info6 -->
| translit_lang2          =
| translit_lang2_type     =
| translit_lang2_info     =
| translit_lang2_type1    =
| translit_lang2_info1    =
| translit_lang2_type2    =
| translit_lang2_info2    = <!-- etc., up to translit_lang2_type6 / translit_lang2_info6 -->
<!-- images, nickname, motto -->
| image_skyline           =
| imagesize               =
| image_alt               =
| image_caption           =
| image_flag               =
| flag_size                =
| flag_alt                 =
| flag_border              =
| flag_link                =
| image_seal              =
| seal_size               =
| seal_alt                =
| seal_link               =
| seal_type               =
| image_shield            =
| shield_size             =
| shield_alt              =
| shield_link             =
| image_blank_emblem      =
| blank_emblem_type       =
| blank_emblem_size       =
| blank_emblem_alt        =
| blank_emblem_link       =
| etymology               = 
| nickname                =
| nicknames               =
| motto                   =
| mottoes                 =
| anthem                  =
<!-- maps and coordinates -->
| image_map               =
| mapsize                 =
| map_alt                 =
| map_caption             =
| image_map1              =
| mapsize1                =
| map_alt1                =
| map_caption1            =
| pushpin_map             = <!-- name of a location map as per Template:Location_map -->
| pushpin_mapsize         =
| pushpin_map_alt         =
| pushpin_map_caption     =
| pushpin_map_caption_notsmall =
| pushpin_label           = <!-- only necessary if "name" or "official_name" are too long -->
| pushpin_label_position  = <!-- position of the pushpin label: left, right, top, bottom, none -->
| pushpin_outside         =
| pushpin_relief          =
| pushpin_image           =
| pushpin_overlay         =
| coordinates             = <!-- {{Coord}} -->
| coor_pinpoint           = <!-- to specify exact location of coordinates (was coor_type) -->
| coordinates_footnotes   = <!-- for references: use <ref> tags -->
| grid_name               = <!-- name of a regional grid system -->
| grid_position           = <!-- position on the regional grid system -->
<!-- location -->
| subdivision_type        = Country
| subdivision_name        = <!-- the name of the country -->
| subdivision_type1       =
| subdivision_name1       =
| subdivision_type2       =
| subdivision_name2       = <!-- etc., subdivision_type6 / subdivision_name6 -->
<!-- established -->
| established_title       = <!-- Founded -->
| established_date        = <!-- requires established_title= -->
| established_title1      = <!-- Incorporated (town) -->
| established_date1       = <!-- requires established_title1= -->
| established_title2      = <!-- Incorporated (city) -->
| established_date2       = <!-- requires established_title2= -->
| established_title3      =
| established_date3       = <!-- requires established_title3= -->
| established_title4      =
| established_date4       = <!-- requires established_title4= -->
| established_title5      =
| established_date5       = <!-- requires established_title5= -->
| established_title6      =
| established_date6       = <!-- requires established_title6= -->
| established_title7      =
| established_date7       = <!-- requires established_title7= -->
| extinct_title           =
| extinct_date            =
| founder                 =
| named_for               =
<!-- seat, smaller parts -->
| seat_type               = <!-- defaults to: Seat -->
| seat                    =
| seat1_type              = <!-- defaults to: Former seat -->
| seat1                   =
| parts_type              = <!-- defaults to: Boroughs -->
| parts_style             = <!-- list, coll (collapsed list), para (paragraph format) -->
| parts                   = <!-- parts text, or header for parts list -->
| p1                      =
| p2                      = <!-- etc., up to p50: for separate parts to be listed-->
<!-- government type, leaders -->
| government_footnotes    = <!-- for references: use <ref> tags -->
| government_type         =
| governing_body          =
| leader_party            =
| leader_title            =
| leader_name             = <!-- add &nbsp; (no-break space) to disable automatic links -->
| leader_title1           =
| leader_name1            = <!-- etc., up to leader_title4 / leader_name4 -->
<!-- display settings -->
| total_type              = <!-- to set a non-standard label for total area and population rows -->
| unit_pref               = <!-- enter: Imperial, to display imperial before metric -->
<!-- area -->
| area_footnotes          = <!-- for references: use <ref> tags -->
| area_magnitude          = <!-- use only to set a special wikilink -->
| dunam_link              = <!-- If dunams are used, this specifies which dunam to link. -->
| area_total_km2          = <!-- ALL fields with measurements have automatic unit conversion -->
| area_total_sq_mi        = <!-- see table @ Template:Infobox settlement for details -->
| area_total_ha           =
| area_total_acre         =
| area_total_dunam        = <!-- used in Middle East articles only -->
| area_land_km2           =
| area_land_sq_mi         =
| area_land_ha            =
| area_land_acre          =
| area_land_dunam         = <!-- used in Middle East articles only -->
| area_water_km2          =
| area_water_sq_mi        =
| area_water_ha           =
| area_water_acre         =
| area_water_dunam        = <!-- used in Middle East articles only -->
| area_water_percent      =
| area_urban_footnotes    = <!-- for references: use <ref> tags -->
| area_urban_km2          =
| area_urban_sq_mi        =
| area_urban_ha           =
| area_urban_acre         =
| area_urban_dunam        = <!-- used in Middle East articles only -->
| area_rural_footnotes    = <!-- for references: use <ref> tags -->
| area_rural_km2          =
| area_rural_sq_mi        =
| area_rural_ha           =
| area_rural_acre         =
| area_rural_dunam        = <!-- used in Middle East articles only -->
| area_metro_footnotes    = <!-- for references: use <ref> tags -->
| area_metro_km2          =
| area_metro_sq_mi        =
| area_metro_ha           =
| area_metro_acre         =
| area_metro_dunam        = <!-- used in Middle East articles only -->
| area_rank               =
| area_blank1_title       =
| area_blank1_km2         =
| area_blank1_sq_mi       =
| area_blank1_ha          =
| area_blank1_acre        =
| area_blank1_dunam       = <!-- used in Middle East articles only -->
| area_blank2_title       =
| area_blank2_km2         =
| area_blank2_sq_mi       =
| area_blank2_ha          =
| area_blank2_acre        =
| area_blank2_dunam       = <!-- used in Middle East articles only -->
| area_note               =
<!-- dimensions -->
| dimensions_footnotes    = <!-- for references: use <ref> tags -->
| length_km               =
| length_mi               =
| width_km                =
| width_mi                =
<!-- elevation -->
| elevation_footnotes     = <!-- for references: use <ref> tags -->
| elevation_m             =
| elevation_ft            =
| elevation_point         = <!-- for denoting the measurement point -->
| elevation_max_footnotes = <!-- for references: use <ref> tags -->
| elevation_max_m         =
| elevation_max_ft        =
| elevation_max_point     = <!-- for denoting the measurement point -->
| elevation_max_rank      =
| elevation_min_footnotes = <!-- for references: use <ref> tags -->
| elevation_min_m         =
| elevation_min_ft        =
| elevation_min_point     = <!-- for denoting the measurement point -->
| elevation_min_rank      =
<!-- population -->
| population_footnotes    = <!-- for references: use <ref> tags -->
| population_as_of        =
| population_total        =
| pop_est_footnotes       =
| pop_est_as_of           =
| population_est          =
| population_rank         =
| population_density_km2  = <!-- for automatic calculation of any density field, use: auto -->
| population_density_sq_mi=
| population_urban_footnotes     =
| population_urban               =
| population_density_urban_km2   =
| population_density_urban_sq_mi =
| population_rural_footnotes     =
| population_rural               =
| population_density_rural_km2   =
| population_density_rural_sq_mi =
| population_metro_footnotes     =
| population_metro               =
| population_density_metro_km2   =
| population_density_metro_sq_mi =
| population_density             =
| population_density_rank        =
| population_blank1_title        =
| population_blank1              =
| population_density_blank1_km2  =
| population_density_blank1_sq_mi=
| population_blank2_title        =
| population_blank2              =
| population_density_blank2_km2  =
| population_density_blank2_sq_mi=
| population_demonym      = <!-- demonym, e.g. Liverpudlian for someone from Liverpool -->
| population_demonyms     =
| population_note         =
<!-- demographics (section 1) -->
| demographics_type1      =
| demographics1_footnotes = <!-- for references: use <ref> tags -->
| demographics1_title1    =
| demographics1_info1     = <!-- etc., up to demographics1_title7 / demographics1_info7 -->
<!-- demographics (section 2) -->
| demographics_type2      =
| demographics2_footnotes = <!-- for references: use <ref> tags -->
| demographics2_title1    =
| demographics2_info1     = <!-- etc., up to demographics2_title10 / demographics2_info10 -->
<!-- time zone(s) -->
| timezone1               =
| utc_offset1             =
| timezone1_DST           =
| utc_offset1_DST         =
| timezone1_location      =
| timezone2               =
| utc_offset2             =
| timezone2_DST           =
| utc_offset2_DST         =
| timezone2_location      =
<!-- postal codes, area code -->
| postal_code_type        = <!-- enter ZIP Code, Postcode, Post code, Postal code... -->
| postal_code             =
| postal2_code_type       = <!-- enter ZIP Code, Postcode, Post code, Postal code... -->
| postal2_code            =
| area_code_type          = <!-- defaults to: Area code(s) -->
| area_code               =
| area_codes              =
| geocode                 =
| iso_code                =
| registration_plate_type =
| registration_plate      =
| code1_name              =
| code1_info              =
| code2_name              =
| code2_info              =
<!-- blank fields (section 1) -->
| blank_name_sec1         =
| blank_info_sec1         =
| blank1_name_sec1        =
| blank1_info_sec1        =
| blank2_name_sec1        =
| blank2_info_sec1        = <!-- etc., up to blank7_name_sec1 / blank7_info_sec1 -->
<!-- blank fields (section 2) -->
| blank_name_sec2         =
| blank_info_sec2         =
| blank1_name_sec2        =
| blank1_info_sec2        =
| blank2_name_sec2        =
| blank2_info_sec2        = <!-- etc., up to blank7_name_sec2 / blank7_info_sec2 -->
<!-- website, footnotes -->
| website                 = <!-- {{URL|example.com}} -->
| footnotes               =
}}

Parameter names and descriptions[edit]

Name and transliteration[edit]

Parameter name Usage Description
name optional This is the usual name in English. If it's not specified, the infobox will use the official_name as a title unless this too is missing, in which case the page name will be used.
official_name optional The official name in English if different from name
native_name optional Name in the local language, if different from name, and if not English. This will display under the name/official name
native_name_lang optional Use ISO 639-2 code, e.g. "fr" for French. If there is more than one native name, in different languages, enter those names using {{lang}}, instead.
other_name optional For places with a former or more common name like Bombay or Saigon
settlement_type optional Any type can be entered, such as City, Town, Village, Hamlet, Municipality, Reservation, etc. If set, will be displayed under the names. Might also be used as a label for total population/area (defaulting to City), if needed to distinguish from Urban, Rural or Metro (if urban, rural or metro figures are not present, the label is Total unless total_type is set).
Transliteration(s)
translit_lang1 optional Will place the "entry" before the word "transliteration(s)". Can be used to specify a particular language like in Dêlêg or one may just enter "Other", like in Gaza's article.
translit_lang1_type
translit_lang1_type1
to
translit_lang1_type6
optional
translit_lang1_info
translit_lang1_info1
to
translit_lang1_info6
optional
translit_lang2 optional Will place a second transliteration. See Dêlêg
translit_lang2_type
translit_lang2_type1
to
translit_lang2_type6
optional
translit_lang2_info
translit_lang2_info1
to
translit_lang2_info6
optional

Images, nickname, motto[edit]

Parameter name Usage Description
Skyline image
image_skyline optional Despite the name it can be any image that an editor wishes.
imagesize optional Can be used to tweak the size of the image_skyline up or down. This can be helpful if an editor wants to make the infobox wider. If used, px must be specified; default size is 250px.
image_alt optional Alt text for the image, used by visually impaired readers who cannot see the image. See WP:ALT.
image_caption optional Will place a caption under the image_skyline (if present)
Flag image
image_flag optional Used for a flag.
flag_size optional Can be used to tweak the size of the image_flag up or down from 100px as desired. If used, px must be specified; default size is 100px.
flag_alt optional Alt text for the flag.
flag_border optional Set to 'no' to remove the border from the flag
flag_link optional
Seal image
image_seal optional If the place has an official seal.
seal_size optional If used, px must be specified; default size is 100px.
seal_alt optional Alt text for the seal.
seal_link
seal_type
optional
Coat of arms image
image_shield optional Can be used for a place with a coat of arms.
shield_size optional If used, px must be specified; default size is 100px.
shield_alt optional Alt text for the shield.
shield_link optional Can be used if a wiki article if known but is not automatically linked by the template. See Coquitlam, British Columbia's infobox for an example.
Logo or emblem image
image_blank_emblem optional Can be used if a place has an official logo, crest, emblem, etc.
blank_emblem_type optional Caption beneath "image_blank_emblem" to specify what type of emblem it is.
blank_emblem_size optional If used, px must be specified; default size is 100px.
blank_emblem_alt optional Alt text for blank emblem.
blank_emblem_link optional
Nickname, motto
etymology optional origin of name
nickname optional well-known nickname
nicknames optional if more than one well-known nickname, use this
motto optional Will place the motto under the nicknames
mottoes optional if more than one mottoe, use this
anthem optional Will place the anthem (song) under the nicknames

Maps, coordinates[edit]

Parameter name Usage Description
Map images
image_map optional
mapsize optional If used, px must be specified; default is 250px.
map_alt optional Alt text for map.
map_caption optional
image_map1 optional A secondary map image. The field image_map must be filled in first. Example see: Bloomsburg, Pennsylvania.
mapsize1 optional If used, px must be specified; default is 250px.
map_alt1 optional Alt text for secondary map.
map_caption1 optional
Pushpin map(s), coordinates
pushpin_map optional The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The coordinate fields (from |coordinates=) position a pushpin coordinate marker and label on the map automatically. Example: Padang, Indonesia. To show multiple pushpin maps, provide a list of maps separated by #, e.g., California#USA
pushpin_mapsize optional Must be entered as only a number—do not use px. The default value is 250.
Equivalent to width parameter in Template:Location map.
pushpin_map_alt optional Alt text for pushpin map; used by screen readers, see WP:ALT.
Equivalent to alt parameter in Template:Location map.
pushpin_map_caption optional Fill out if a different caption from map_caption is desired.
Equivalent to caption parameter in Template:Location map.
pushpin_map_caption_notsmall optional
pushpin_label optional The text of the label to display next to the identifying mark; a wikilink can be used. If not specified, the label will be the text assigned to the name or official_name parameters (if |pushpin_label_position=none, no label is displayed).
Equivalent to label parameter in Template:Location map.
pushpin_label_position optional The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}. If this field is not specified, the default value is right.
Equivalent to position parameter in Template:Location map.
pushpin_outside optional Equivalent to outside parameter in Template:Location map.
pushpin_relief optional Set this to y or any non-blank value to use an alternative relief map provided by the selected location map (if a relief map is available).
Equivalent to relief parameter in Template:Location map.
pushpin_image optional Allows the use of an alternative map; the image must have the same edge coordinates as the location map template.
Equivalent to AlternativeMap parameter in Template:Location map.
pushpin_overlay optional Can be used to specify an image to be superimposed on the regular pushpin map.
Equivalent to overlay_image parameter in Template:Location map.
coordinates optional Latitude and longitude. Use {{Coord}}. See the documentation for {{Coord}} for more details on usage.
coor_pinpoint optional If needed, to specify more exactly where (or what) coordinates are given (e.g. Town Hall) or a specific place in a larger area (e.g. a city in a county). Example: Masovian Voivodeship
coordinates_footnotes optional Reference(s) for coordinates, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
grid_name
grid_position
optional Name of a regional grid system and position on the regional grid

Location, established, seat, subdivisions, government, leaders[edit]

Parameter name Usage Description
Location
subdivision_type optional almost always Country
subdivision_name optional Depends on the subdivision_type—use the name in text form, sample: United States, flag icons or flag templates can be used in this field.
subdivision_type1
to
subdivision_type6
optional Can be State/Province, region, county.
subdivision_name1
to
subdivision_name6
optional Use the name in text form, sample: Florida or [[Florida]]. Flag icons or flag templates can be used in this field per WP:MOSFLAG.
Established
established_title optional Example: Founded
established_date optional Requires established_title=
established_title1 optional Example: Incorporated (town)
[Note that "established_title1" is distinct from "established_title"; you can think of "established_title" as behaving like "established_title0".]
established_date1 optional [See note for "established_title1".] Requires established_title1=
established_title2 optional Example: Incorporated (city)
established_date2 optional Requires established_title2=
established_title3 optional
established_date3 optional Requires established_title3=
established_title4 optional
established_date4 optional Requires established_title4=
established_title5 optional
established_date5 optional Requires established_title5=
established_title6 optional
established_date6 optional Requires established_title6=
established_title7 optional
established_date7 optional Requires established_title7=
extinct_title optional For when a settlement ceases to exist
extinct_date optional Requires extinct_title=
founder optional Who the settlement was founded by
named_for optional The source of the name of the settlement (a person, a place, et cetera)
Seat of government
seat_type optional The label for the seat of government (defaults to Seat).
seat optional The seat of government.
Smaller parts (e.g. boroughs of a city)
parts_type optional The label for the smaller subdivisions (defaults to Boroughs).
parts_style optional Set to list to display as a collapsible list, coll as a collapsed list, or para to use paragraph style. Default is list for up to 5 items, otherwise coll.
parts optional Text or header of the list of smaller subdivisions.
p1
p2
to
p50
optional The smaller subdivisions to be listed. Example: Warsaw
Government type, leaders
government_footnotes optional Reference(s) for government, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
government_type optional Examples: Mayor–council government, Council–manager government, City commission government, ...
governing_body optional Name of the place's governing body
leader_party optional Political party of the place's leader
leader_title optional First title of the place's leader, e.g. Mayor
leader_name optional Name of the place's leader
leader_title1
to
leader_title4
optional
leader_name1
to
leader_name4
optional For long lists use {{Collapsible list}}. See Halifax for an example.

Geographic information[edit]

These fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they should enter both values in their respective fields.
Parameter name Usage Description
Display settings
total_type optional Specifies what "total" area and population figure refer to, e.g. Greater London. This overrides other labels for total population/area. To make the total area and population display on the same line as the words "Area" and "Population", with no "Total" or similar label, set the value of this parameter to  .
unit_pref optional To change the unit order to imperial (metric), enter imperial. The default display style is metric (imperial). However, the template will swap the order automatically if the subdivision_name equals some variation of the USA or the UK.
For the middle east, a unit preference of dunam can be entered (only affects total area).
All values must be entered in a raw format: no commas, spaces, or unit symbols. The template will format them automatically.
Area
area_footnotes optional Reference(s) for area, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
area_magnitude optional Setting this to any non-empty value will create a link to the appropriate order of magnitude of area page (e.g. 1 E+6 m²).
dunam_link optional If dunams are used, the default is to link the word dunams in the total area section. This can be changed by setting dunam_link to another measure (e.g. dunam_link=water). Linking can also be turned off by setting the parameter to something else (e.g. dunam_link=none or dunam_link=off).
area_total_km2 optional Total area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_total_sq_mi is empty.
area_total_ha optional Total area in hectares—symbol: ha. Value must be entered in raw format, no commas or spaces. Auto-converted to display acres if area_total_acre is empty.
area_total_sq_mi optional Total area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_total_km2 is empty.
area_total_acre optional Total area in acres. Value must be entered in raw format, no commas or spaces. Auto-converted to display hectares if area_total_ha is empty.
area_total_dunam optional Total area in dunams, which is wiki-linked. Used in middle eastern places like Israel, Gaza, and the West Bank. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers or hectares and square miles or acreds if area_total_km2, area_total_ha, area_total_sq_mi, and area_total_acre are empty. Examples: Gaza and Ramallah
area_land_km2 optional Land area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_land_sq_mi is empty.
area_land_sq_mi optional Land area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_land_km2 is empty.
area_land_ha optional similar to area_total_ha
area_land_dunam optional similar to area_total_dunam
area_land_acre optional similar to area_total_acre
area_water_km2 optional Water area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_water_sq_mi is empty.
area_water_sq_mi optional Water area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_water_km2 is empty.
area_water_ha optional similar to area_total_ha
area_water_dunam optional similar to area_total_dunam
area_water_acre optional similar to area_total_acre
area_water_percent optional percent of water without the "%"
area_urban_km2 optional
area_urban_sq_mi optional
area_urban_ha optional similar to area_total_ha
area_urban_dunam optional similar to area_total_dunam
area_urban_acre optional similar to area_total_acre
area_rural_km2 optional
area_rural_sq_mi optional
area_rural_ha optional similar to area_total_ha
area_rural_dunam optional similar to area_total_dunam
area_rural_acre optional similar to area_total_acre
area_metro_km2 optional
area_metro_sq_mi optional
area_metro_ha optional similar to area_total_ha
area_metro_dunam optional similar to area_total_dunam
area_metro_acre optional similar to area_total_acre
area_rank optional The settlement's area, as ranked within its parent sub-division
area_blank1_title optional Example see London
area_blank1_km2 optional
area_blank1_sq_mi optional
area_blank1_ha optional similar to area_total_ha
area_blank1_dunam optional similar to area_total_dunam
area_blank1_acre optional similar to area_total_acre
area_blank2_title optional
area_blank2_km2 optional
area_blank2_sq_mi optional
area_blank2_ha optional similar to area_total_ha
area_blank2_dunam optional similar to area_total_dunam
area_blank2_acre optional similar to area_total_acre
area_note optional A place for additional information such as the name of the source.
Dimensions
dimensions_footnotes optional Reference(s) for dimensions, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
length_km optional Raw number entered in kilometers. Will automatically convert to display length in miles if length_mi is empty.
length_mi optional Raw number entered in miles. Will automatically convert to display length in kilometers if length_km is empty.
width_km optional Raw number entered in kilometers. Will automatically convert to display width in miles if length_mi is empty.
width_mi optional Raw number entered in miles. Will automatically convert to display width in kilometers if length_km is empty.
Elevation
elevation_footnotes optional Reference(s) for elevation, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
elevation_m optional Raw number entered in meters. Will automatically convert to display elevation in feet if elevation_ft is empty. However, if a range in elevation (i.e. 5–50 m ) is desired, use the "max" and "min" fields below
elevation_ft optional Raw number, entered in feet. Will automatically convert to display the average elevation in meters if elevation_m field is empty. However, if a range in elevation (e.g. 50–500 ft ) is desired, use the "max" and "min" fields below
elevation_max_footnotes
elevation_min_footnotes
optional Same as above, but for the "max" and "min" elevations. See Leeds.
elevation_max_m
elevation_max_ft
elevation_max_rank
elevation_min_m
elevation_min_ft
elevation_min_rank
optional Used to give highest & lowest elevations and rank, instead of just a single value. Example: Halifax Regional Municipality.

Population, demographics[edit]

The density fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they can enter both values in their respective fields. To calculate density with respect to the total area automatically, type auto in place of any density value.
Parameter name Usage Description
Population
population_total optional Actual population (see below for estimates) preferably consisting of digits only (without any commas)
population_as_of optional The year for the population total (usually a census year)
population_footnotes optional Reference(s) for population, placed within <ref> </ref> tags
population_density_km2 optional
population_density_sq_mi optional
population_est optional Population estimate.
pop_est_as_of optional The year or month & year of the population estimate
pop_est_footnotes optional Reference(s) for population estimate, placed within <ref> </ref> tags
population_urban optional
population_urban_footnotes optional Reference(s) for urban population, placed within <ref> </ref> tags
population_density_urban_km2 optional
population_density_urban_sq_mi optional
population_rural optional
population_rural_footnotes optional Reference(s) for rural population, placed within <ref> </ref> tags
population_density_rural_km2 optional
population_density_rural_sq_mi optional
population_metro optional
population_metro_footnotes optional Reference(s) for metro population, placed within <ref> </ref> tags
population_density_metro_km2 optional
population_density_metro_sq_mi optional
population_rank optional The settlement's population, as ranked within its parent sub-division
population_density_rank optional The settlement's population density, as ranked within its parent sub-division
population_blank1_title optional Can be used for estimates. Example: Windsor, Ontario
population_blank1 optional The population value for blank1_title
population_density_blank1_km2 optional
population_density_blank1_sq_mi optional
population_blank2_title optional
population_blank2 optional
population_density_blank2_km2 optional
population_density_blank2_sq_mi optional
population_demonym optional A demonym or gentilic is a word that denotes the members of a people or the inhabitants of a place. For example, a citizen in Liverpool is known as a Liverpudlian.
population_demonyms optional If more than one demonym, use this
population_note optional A place for additional information such as the name of the source. See Windsor, Ontario for example.
Demographics (section 1)
demographics_type1 optional Section Header. For example: Ethnicity
demographics1_footnotes optional Reference(s) for demographics section 1, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
demographics1_title1
to
demographics1_title7
optional Titles related to demographics_type1. For example: White, Black, Hispanic...
demographics1_info1
to
demographics1_info7
optional Information related to the "titles". For example: 50%, 25%, 10%...
Demographics (section 2)
demographics_type2 optional A second section header. For example: Languages
demographics2_footnotes optional Reference(s) for demographics section 2, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
demographics2_title1
to
demographics2_title10
optional Titles related to demographics_type2. For example: English, French, Arabic...
demographics2_info1
to
demographics2_info10
optional Information related to the "titles" for type2. For example: 50%, 25%, 10%...

Other information[edit]

Parameter name Usage Description
Time zone(s)
timezone1 optional
utc_offset1 optional Plain text, e.g. "+05:00" or "-08:00". Auto-linked, so do not include references or additional text.
timezone1_DST optional
utc_offset1_DST optional
timezone2 optional A second timezone field for larger areas such as a Province.
utc_offset2 optional
timezone2_DST optional
utc_offset2_DST optional
Postal code(s) & area code
postal_code_type optional
postal_code optional
postal2_code_type optional
postal2_code optional
area_code_type optional If left blank/not used template will default to "Area code(s)"
area_code optional
area_codes optional If more than one area code, use this
geocode optional See Geocode
iso_code optional See ISO 3166
registration_plate_type optional If left blank/not used template will default to "Vehicle registration"
registration_plate optional See Vehicle registration plate
Blank fields (section 1)
blank_name_sec1 optional Fields used to display other information. The name is displayed in bold on the left side of the infobox.
blank_info_sec1 optional The information associated with the blank_name heading. The info is displayed on right side of infobox, in the same row as the name. For an example, see: Warsaw
blank1_name_sec1
to
blank7_name_sec1
optional Up to 7 additional fields (8 total) can be displayed in this section
blank1_info_sec1
to
blank7_info_sec1
optional
Blank fields (section 2)
blank_name_sec2 optional For a second section of blank fields
blank_info_sec2 optional Example: Beijing
blank1_name_sec2
to
blank7_name_sec2
optional Up to 7 additional fields (8 total) can be displayed in this section
blank1_info_sec2
to
blank7_info_sec2
optional
Website, footnotes
website optional External link to official website, Use {{URL}}, thus: {{URL|example.com}}
footnotes optional Text to be displayed at the bottom of the infobox
short_description optional specify custom short description; if not specified, one will be automatically generated, e.g. "Place in Israel".

Examples[edit]

Example 1
Chicago
City
Clockwise from top: Downtown Chicago, the Chicago Theatre, the Chicago 'L', Navy Pier, Millennium Park, the Field Museum, and the Willis (formerly Sears) Tower
Flag of Chicago
Flag
Official seal of Chicago
Seal
Etymology: Template:Lang-mia ("wild onion" or "wild garlic")
Nickname(s): The Windy City, The Second City, Chi-Town, Chi-City, Hog Butcher for the World, City of the Big Shoulders, The City That Works, and others found at List of nicknames for Chicago
Motto(s): Latin: Urbs in Horto (City in a Garden), Make Big Plans (Make No Small Plans), I Will
Location in the Chicago metropolitan area and Illinois
Location in the Chicago metropolitan area and Illinois
Lua error in Module:Location_map at line 321: No value was provided for longitude.
Coordinates: Lua error in package.lua at line 80: module 'Module:ISO 3166/data/US' not found. 41°50′15″N 87°40′55″W[1]
Country United States
State Illinois
Counties Cook, DuPage
Settled 1770s
Incorporated March 4, 1837
Named for Template:Lang-mia
("Wild onion")
Government
 • Type Mayor–council
 • Mayor Rahm Emanuel (D)
 • Council Chicago City Council
Area[1]
 • City Template:Infobox settlement/impus/mag
 • Land 227.635 sq mi (589.57 km2)
 • Water 6.479 sq mi (16.78 km2)  3%
 • Urban 2,123 sq mi (5,500 km2)
 • Metro 10,874 sq mi (28,160 km2)
Elevation[2] 594 ft (181 m)
Population (2010)[3][4]
 • City 2,695,598
 • Estimate (2011) 2,707,120
 • Rank 3rd US
 • Density 11,892.4/sq mi (4,591.7/km2)
 • Urban 8,711,000
 • Urban densityBad rounding here4,100/sq mi (Bad rounding here1,600/km2)
 • Metro 9,461,105
 • Metro densityBad rounding here870/sq mi (Bad rounding here340/km2)
Demonym(s) Chicagoan
Time zone CST (UTC−06:00)
 • Summer (DST) CDT (UTC−05:00)
Area codes 312, 773, 872
FIPS code Template:FIPS
GNIS feature ID Template:GNIS4, Template:GNIS4
Website www.cityofchicago.org
[2]
<!-- NOTE: This differs from the actual Chicago infobox in order to provide examples. -->
{{Infobox settlement
| name = Chicago
| settlement_type = [[City (Illinois)|City]]
| image_skyline = Chicago montage.jpg
| imagesize = 275px <!--default is 250px-->
| image_caption = Clockwise from top: [[Downtown Chicago]], the [[Chicago Theatre]], the [[Chicago 'L']], [[Navy Pier]], [[Millennium Park]], the [[Field Museum]], and the [[Willis Tower|Willis (formerly Sears) Tower]]
| image_flag = Flag of Chicago, Illinois.svg
| image_seal = Seal of Chicago, Illinois.svg
| etymology = {{lang-mia|shikaakwa}} ("wild onion" or "wild garlic")
| nickname = [[Origin of Chicago's "Windy City" nickname|The Windy City]], The Second City, Chi-Town, Chi-City, Hog Butcher for the World, City of the Big Shoulders, The City That Works, and others found at [[List of nicknames for Chicago]]
| motto = {{lang-la|Urbs in Horto}} (''City in a Garden''), Make Big Plans (Make No Small Plans), I Will
| image_map = US-IL-Chicago.png
| map_caption = Location in the [[Chicago metropolitan area]] and Illinois
| pushpin_map = USA
| pushpin_map_caption = Location in the United States
| coordinates = {{coord|41|50|15|N|87|40|55|W}}
| coordinates_footnotes = <ref name="USCB Gazetteer 2010"/>
| subdivision_type = Country
| subdivision_name = United States
| subdivision_type1 = State
| subdivision_name1 = [[Illinois]]
| subdivision_type2 = [[List of counties in Illinois|Counties]]
| subdivision_name2 = [[Cook County, Illinois|Cook]], [[DuPage County, Illinois|DuPage]]
| established_title = Settled
| established_date = 1770s
| established_title2 = [[Municipal corporation|Incorporated]]
| established_date2 = March 4, 1837
| founder =
| named_for = {{lang-mia|shikaakwa}}<br /> ("Wild onion")
| government_type = [[Mayor–council government|Mayor–council]]
| leader_title = [[Mayor of Chicago|Mayor]]
| leader_name = [[Rahm Emanuel]]
| leader_party = [[Democratic Party (United States)|D]]
| leader_title1 = [[City council|Council]]
| leader_name1 = [[Chicago City Council]]
| unit_pref = Imperial
| area_footnotes = <ref name="USCB Gazetteer 2010">{{cite web | url = https://www.census.gov/geo/www/gazetteer/files/Gaz_places_national.txt | title = 2010 United States Census Gazetteer for Places: January 1, 2010 | format = text | work = 2010 United States Census | publisher = [[United States Census Bureau]] | date = April 2010 | accessdate = August 1, 2012}}</ref>
| area_magnitude = 1 E+8
| area_total_sq_mi = 234.114
| area_land_sq_mi  = 227.635
| area_water_sq_mi = 6.479
| area_water_percent = 3
| area_urban_sq_mi = 2123
| area_metro_sq_mi = 10874
| elevation_footnotes = <ref name="GNIS"/>
| elevation_ft = 594
| elevation_m  = 181
| population_footnotes = <ref name="USCB PopEstCities 2011">{{cite web | url = https://www.census.gov/popest/data/cities/totals/2011/tables/SUB-EST2011-01.csv | title = Annual Estimates of the Resident Population for Incorporated Places Over 50,000, Ranked by July 1, 2011 Population | format = [[comma-separated values|CSV]] | work = 2011 Population Estimates | publisher = [[United States Census Bureau]], Population Division | date = June 2012 | accessdate = August 1, 2012}}</ref><ref name="USCB Metro 2010">{{cite web | url=https://www.census.gov/prod/cen2010/briefs/c2010br-01.pdf | title = Population Change for the Ten Most Populous and Fastest Growing Metropolitan Statiscal Areas: 2000 to 2010 | date = March 2011 | publisher = [[U.S. Census Bureau]] | page = 6 |accessdate = April 12, 2011}}</ref>
| population_as_of = [[2010 United States Census|2010]]
| population_total = 2695598
| pop_est_footnotes =
| pop_est_as_of = 2011
| population_est = 2707120
| population_rank  = [[List of United States cities by population|3rd US]]
| population_density_sq_mi = 11,892.4<!-- 2011 population_est / area_land_sq_mi -->
| population_urban = 8711000
| population_density_urban_sq_mi = auto
| population_metro = 9461105
| population_density_metro_sq_mi = auto
| population_demonym = Chicagoan
| timezone = [[Central Standard Time|CST]]
| utc_offset = −06:00
| timezone_DST = [[Central Daylight Time|CDT]]
| utc_offset_DST = −05:00
| area_code_type = [[North American Numbering Plan|Area codes]]
| area_code = [[Area code 312|312]], [[Area code 773|773]], [[Area code 872|872]]
| blank_name = [[Federal Information Processing Standards|FIPS]] code
| blank_info = {{FIPS|17|14000}}
| blank1_name = [[Geographic Names Information System|GNIS]] feature ID
| blank1_info = {{GNIS4|423587}}, {{GNIS4|428803}}
| website = {{URL|www.cityofchicago.org}}
| footnotes = <ref name="GNIS">{{Cite GNIS|428803|City of Chicago|April 12, 2011}}</ref>
}}
References
  1. 1.0 1.1 Lua error in Module:Citation/CS1 at line 2593: attempt to call field 'has_accept_as_written' (a nil value).
  2. 2.0 2.1 Template:Cite GNIS
  3. ^ Lua error in Module:Citation/CS1 at line 2593: attempt to call field 'has_accept_as_written' (a nil value).
  4. ^ Lua error in Module:Citation/CS1 at line 2593: attempt to call field 'has_accept_as_written' (a nil value).

Example 2
Detroit
City
City of Detroit
Images from top to bottom, left to right: Downtown Detroit skyline, Spirit of Detroit, Greektown, Ambassador Bridge, Michigan Soldiers' and Sailors' Monument, Fox Theatre, and Comerica Park.
Flag of Detroit
Flag
Official seal of Detroit
Seal
Etymology: French: détroit (strait)
Nickname(s): The Motor City, Motown, Renaissance City, The D, Hockeytown, The Automotive Capital of the World, Rock City, The 313
Motto(s): Speramus Meliora; Resurget Cineribus
(Latin: We Hope For Better Things; It Shall Rise From the Ashes)
Location within Wayne County, Michigan and the state of Michigan
Location within Wayne County, Michigan and the state of Michigan
Lua error in Module:Location_map at line 321: No value was provided for longitude.
Coordinates: 42°19′53″N 83°2′45″W
Country Template:Country data United States of America
State Template:Country data Michigan
County Wayne
Founded 1701
Incorporated 1806
Government
 • Type Mayor–council
 • Mayor Dave Bing (D)
 • City Council
Area
 • City 142.87 sq mi (370.03 km2)
 • Land 138.75 sq mi (359.36 km2)
 • Water 4.12 sq mi (10.67 km2)
 • Urban 1,295 sq mi (3,350 km2)
 • Metro 3,913 sq mi (10,130 km2)
Elevation 600 ft (200 m)
Population (2011)
 • City 706,585
 • Rank 18th in U.S.
 • Density 5,142/sq mi (1,985/km2)
 • Urban 3,863,924
 • Metro 4,285,832 (US: 13th)
 • CSA 5,207,434 (US: 11th)
Demonym(s) Detroiter
Time zone EST (UTC−5)
 • Summer (DST) EDT (UTC−4)
Area code(s) 313
FIPS code Template:FIPS
GNIS feature ID Template:GNIS4, Template:GNIS4
Website DetroitMI.gov
{{Infobox settlement
| name                    = Detroit
| settlement_type         = [[City (Michigan)|City]]
| official_name           = City of Detroit
| image_skyline           = Detroit Montage.jpg
| imagesize               = 290px
| image_caption           = Images from top to bottom, left to right: [[Downtown Detroit]] skyline, [[Spirit of Detroit]], [[Greektown Historic District|Greektown]], [[Ambassador Bridge]], [[Michigan Soldiers' and Sailors' Monument]], [[Fox Theatre (Detroit)|Fox Theatre]], and [[Comerica Park]].
| image_flag              = Flag of Detroit, Michigan.svg
| image_seal              = Seal of Detroit, Michigan.svg
| etymology               = {{lang-fr|détroit}} ([[strait]])
| nickname                = The Motor City, Motown, Renaissance City, The D, Hockeytown, The Automotive Capital of the World, Rock City, The 313
| motto                   = ''Speramus Meliora; Resurget Cineribus''<br /><small>([[Latin]]: We Hope For Better Things; It Shall Rise From the Ashes)</small>
| image_map               = Wayne County Michigan Incorporated and Unincorporated areas Detroit highlighted.svg
| mapsize                 = 250x200px
| map_caption             = Location within [[Wayne County, Michigan]] and the state of [[Michigan]]
| pushpin_map             = USA
| pushpin_map_caption     = Location within the [[Contiguous United States|contiguous United States of America]]
| coordinates = {{coord|42|19|53|N|83|2|45|W}}
| coordinates_footnotes   =
| subdivision_type        = Country
| subdivision_name        = {{flagu|United States of America}}
| subdivision_type1       = State
| subdivision_name1       = {{flag|Michigan}}
| subdivision_type2       = [[List of counties in Michigan|County]]
| subdivision_name2       = [[Wayne County, Michigan|Wayne]]
| established_title       = Founded
| established_date        = 1701
| established_title2      = Incorporated
| established_date2       = 1806
| government_footnotes    = <!-- for references: use<ref> tags -->
| government_type         = [[Mayor-council government|Mayor-Council]]
| leader_title            = [[List of mayors of Detroit, Michigan|Mayor]]
| leader_name             = [[Dave Bing]]
| leader_party            = [[Democratic Party (United States)|D]]
| leader_title1           = [[Detroit City Council|City Council]]
| leader_name1            = {{collapsible list|bullets=yes
 | title = Members
 | 1 = [[Charles Pugh]] – Council President
 | 2 = [[Gary Brown (Detroit politician)|Gary Brown]] – Council President Pro-Tem
 | 3 = [[JoAnn Watson]]
 | 4 = [[Kenneth Cockrel, Jr.]]
 | 5 = [[Saunteel Jenkins]]
 | 6 = [[Andre Spivey]]
 | 7 = [[James Tate (Detroit politician)|James Tate]]
 | 8 = [[Brenda Jones (Detroit politician)|Brenda Jones]]
 | 9 = [[Kwame Kenyatta]]
 }}
| unit_pref               = Imperial
| area_footnotes          =
| area_magnitude          =
| area_total_sq_mi        = 142.87
| area_total_km2          = 370.03
| area_land_sq_mi         = 138.75
| area_land_km2           = 359.36
| area_water_sq_mi        = 4.12
| area_water_km2          = 10.67
| area_urban_sq_mi        = 1295
| area_metro_sq_mi        = 3913
| elevation_footnotes     =
| elevation_ft            = 600
| population_footnotes    =
| population_as_of        = 2011
| population_total        = 706585
| population_rank         = [[List of United States cities by population|18th in U.S.]]
| population_urban        = 3863924
| population_metro        = 4285832 (US: [[List of United States metropolitan statistical areas|13th]])
| population_blank1_title = [[Combined statistical area|CSA]]
| population_blank1       = 5207434 (US: [[List of United States combined statistical areas|11th]])
| population_density_sq_mi= {{#expr:713777/138.8 round 0}}
| population_demonym      = Detroiter
| population_note         =
| timezone                = [[Eastern Time Zone (North America)|EST]]
| utc_offset              = −5
| timezone_DST            = [[Eastern Daylight Time|EDT]]
| utc_offset_DST          = −4
| postal_code_type        =
| postal_code             =
| area_code               = [[Area code 313|313]]
| blank_name              = [[Federal Information Processing Standards|FIPS code]]
| blank_info              = {{FIPS|26|22000}}
| blank1_name             = [[Geographic Names Information System|GNIS]] feature ID
| blank1_info             = {{GNIS4|1617959}}, {{GNIS4|1626181}}
| website                 = [http://www.detroitmi.gov/ DetroitMI.gov]
| footnotes               =
}}

Supporting templates[edit]

The following is a list of sub-templates used by Infobox settlement. See the current list of all sub-templates for documentation, sandboxes, testcases, etc.

  1. {{Infobox settlement/areadisp}}
  2. {{Infobox settlement/densdisp}}
  3. {{Infobox settlement/dunam}}
  4. {{Infobox settlement/dunam/mag}}
  5. {{Infobox settlement/impus}}
  6. {{Infobox settlement/impus/mag}}
  7. {{Infobox settlement/lengthdisp}}
  8. {{Infobox settlement/link}}
  9. {{Infobox settlement/metric}}
  10. {{Infobox settlement/metric/mag}}
  11. {{Infobox settlement/pref}}

Microformat[edit]

Template:UF-hcard-geo

TemplateData[edit]

Extended content
This is the TemplateData documentation for this template used by VisualEditor and other tools; see the monthly error report for this template.

TemplateData for Infobox settlement

<templatedata> { "description": "An Infobox for human settlements (cities, towns, villages, communities) as well as other administrative districts, counties, provinces, et cetera", "params": { "name": { "label": "Common name", "description": "This is the usual name in English. If it's not specified, the infobox will use the 'official_name' as a title unless this too is missing, in which case the page name will be used.", "type": "string", "suggested": true }, "official_name": { "label": "Official name", "description": "The official name in English if different from 'name'", "type": "string", "suggested": true }, "native_name": { "label": "Native name", "description": "This will display under the name/official name", "type": "string", "example": "Distrito Federal de México" }, "native_name_lang": { "label": "Native name language", "description": "Use ISO 639-2 code, e.g. 'fr' for French. If there is more than one native name, in different languages, enter those names using {{{2}}}, instead.", "type": "string", "example": "zh" }, "other_name": { "label": "Other name", "description": "For places with a former or more common name like Bombay or Saigon", "type": "string" }, "settlement_type": { "label": "Type of settlement", "description": "Any type can be entered, such as City, Town, Village, Hamlet, Municipality, Reservation, etc. If set, will be displayed under the names, provided that either 'name' or 'official_name' is filled in. Might also be used as a label for total population/area (defaulting to City), if needed to distinguish from Urban, Rural or Metro (if urban, rural or metro figures are not present, the label is Total unless 'total_type' is set).", "type": "string", "aliases": [ "type" ] }, "translit_lang1": { "label": "Transliteration from language 1", "description": "Will place the entry before the word 'transliteration(s)'. Can be used to specify a particular language like in Dêlêg or one may just enter 'Other', like in Gaza's article.", "type": "string" }, "translit_lang1_type": { "label": "Transliteration type for language 1", "type": "line", "example": "Hanyu pinyin", "description": "The type of transliteration used for the first language" }, "translit_lang1_info": { "label": "Transliteration language 1 info", "description": "Parameters translit_lang2_info1, ... translit_lang2_info6 are also available but not documented here", "type": "string" }, "translit_lang2": { "label": "Transliteration language 2", "description": "Will place a second transliteration. See Dêlêg", "type": "string" }, "image_skyline": { "label": "Image of skyline", "description": "Despite the name it can be any image that an editor wishes.", "type": "wiki-file-name" }, "imagesize": { "label": "Image size", "description": "Can be used to tweak the size of the image_skyline up or down. This can be helpful if an editor wants to make the infobox wider. If used, 'px' must be specified; default size is 250px.", "type": "string" }, "image_alt": { "label": "Image alt text", "description": "Alt (hover) text for the image, used by visually impaired readers who cannot see the image.", "type": "string" }, "image_caption": { "label": "Image caption", "description": "Will place a caption under the image_skyline (if present)", "type": "content" }, "image_flag": { "label": "Flag image", "description": "Used for a flag.", "type": "wiki-file-name" }, "flag_size": { "label": "Flag size", "description": "Can be used to tweak the size of the image_flag up or down from 100px as desired. If used, 'px' must be specified; default size is 100px.", "type": "string" }, "flag_alt": { "label": "Flag alt text", "description": "Alt text for the flag.", "type": "string" }, "flag_border": { "label": "Flag border?", "description": "Set to 'no' to remove the border from the flag", "type": "string", "example": "no" }, "flag_link": { "label": "Flag link", "type": "string", "description": "Link to the flag" }, "image_seal": { "label": "Official seal image", "description": "An image of an official seal, if the place has one", "type": "wiki-file-name" }, "seal_size": { "label": "Seal size", "description": "If used, 'px' must be specified; default size is 100px.", "type": "string" }, "seal_alt": { "label": "Seal alt text", "description": "Alt (hover) text for the seal", "type": "string" }, "seal_link": { "label": "Seal link", "type": "string", "description": "Link to the seal" }, "image_shield": { "label": "Coat of arms/shield image", "description": "Can be used for a place with a coat of arms.", "type": "wiki-file-name" }, "shield_size": { "label": "Shield size", "description": "If used, 'px' must be specified; default size is 100px.", "type": "string", "example": "200px" }, "shield_alt": { "label": "Shield alt text", "description": "Alternate text for the shield.", "type": "string" }, "shield_link": { "label": "Shield link", "description": "Can be used if a wiki article if known but is not automatically linked by the template. See Coquitlam, British Columbia's infobox for an example.", "type": "string" }, "image_blank_emblem": { "label": "Blank emblem image", "description": "Can be used if a place has an official logo, crest, emblem, etc.", "type": "wiki-file-name" }, "blank_emblem_type": { "label": "Blank emblem type", "description": "Caption beneath 'image_blank_emblem' to specify what type of emblem it is.", "type": "string", "example": "Logo" }, "blank_emblem_size": { "label": "Blank emblem size", "description": "If used, 'px' must be specified; default size is 100px.", "type": "string", "example": "200px" }, "blank_emblem_alt": { "label": "Blank emblem alt text", "description": "Alt text for blank emblem.", "type": "string" }, "blank_emblem_link": { "label": "Blank emblem link", "type": "string", "description": "A link to the emblem of custom type" }, "nickname": { "label": "Nickname", "description": "well-known nickname(s)", "type": "string", "example": "Sin City" }, "motto": { "label": "Motto", "description": "Will place the motto under the nicknames", "type": "string" }, "anthem": { "label": "Anthem", "description": "Will place the anthem (song) under the nicknames", "type": "string", "example": "Hatikvah" }, "image_map": { "label": "Map image", "description": "a map of the region, or a map with the region highlighted within a parent region", "type": "wiki-file-name" }, "mapsize": { "label": "Map size", "description": "If used, 'px' must be specified; default is 250px.", "type": "string" }, "map_alt": { "label": "Map alt text", "description": "Alternate (hover) text for the map", "type": "string" }, "map_caption": { "label": "Map caption", "type": "content", "description": "Caption for the map displayed" }, "image_map1": { "label": "Map 2 image", "description": "A secondary map image. The field 'image_map' must be filled in first. For an example, see Bloomsburg, Pennsylvania.", "example": "File:Columbia County Pennsylvania Incorporated and Unincorporated areas Bloomsburg Highlighted.svg", "type": "wiki-file-name" }, "mapsize1": { "label": "Map 2 size", "description": "If used, 'px' must be specified; default is 250px.", "type": "string", "example": "300px" }, "map_alt1": { "label": "Map 2 alt text", "description": "Alt (hover) text for the second map", "type": "string" }, "map_caption1": { "label": "Map 2 caption", "type": "content", "description": "Caption of the second map" }, "pushpin_map": { "label": "Pushpin map", "description": "The name of a location map (e.g. 'Indonesia' or 'Russia'). The coordinates information (from the coordinates parameter) position a pushpin coordinate marker and label on the map 'automatically'. Example see: Padang, Indonesia", "type": "string", "example": "Indonesia" }, "pushpin_mapsize": { "label": "Pushpin map size", "description": "Must be entered as only a number—do not use px. The default value is 250.", "type": "number", "example": "200" }, "pushpin_map_alt": { "label": "Pushpin map alt text", "description": "Alt (hover) text for the pushpin map", "type": "string" }, "pushpin_map_caption": { "label": "Pushpin map caption", "description": "Fill out if a different caption from map_caption is desired.", "type": "string", "example": "Map showing Bloomsburg in Pennsylvania" }, "pushpin_label": { "label": "Pushpin label", "type": "line", "example": "Bloomsburg", "description": "Label of the pushpin" }, "pushpin_label_position": { "label": "Pushpin label position", "description": "The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}. If this field is not specified, the default value is right.", "type": "string", "example": "left", "default": "right" }, "pushpin_outside": { "label": "Pushpin outside?", "type": "line" }, "pushpin_relief": { "label": "Pushpin relief", "description": "Set this to 'y' or any non-blank value to use an alternative relief map provided by the selected location map (if a relief map is available).", "type": "string", "example": "y" }, "pushpin_image": { "label": "Pushpin image", "type": "wiki-file-name", "description": "Image to use for the pushpin" }, "pushpin_overlay": { "label": "Pushpin overlay", "description": "Can be used to specify an image to be superimposed on the regular pushpin map.", "type": "wiki-file-name" }, "coordinates": { "label": "Coordinates", "description": "Latitude and longitude. Use . See the documentation for for more details on usage.", "type": "wiki-template-name", "example": "41°50′15″N 87°40′55″W" }, "coor_pinpoint": { "label": "Coordinate pinpoint", "description": "If needed, to specify more exactly where (or what) coordinates are given (e.g. 'Town Hall') or a specific place in a larger area (e.g. a city in a county). Example: Masovian Voivodeship", "type": "string" }, "coordinates_footnotes": { "label": "Coordinates footnotes", "description": "Reference(s) for coordinates, placed within Cite error: Invalid <ref> tag; refs with no name must have content tags, possibly using the citing format at Lua error in Module:Citation/CS1 at line 2593: attempt to call field 'has_accept_as_written' (a nil value).", "type": "string" }, "subdivision_type": { "label": "Subdivision type 1", "description": "Almost always 'Country'", "type": "string", "example": "Country" }, "subdivision_name": { "label": "Subdivision name 1", "description": "Depends on the subdivision_type—use the name in text form, sample: 'United States', flag icons or flag templates can be used in this field.", "type": "string" }, "subdivision_type1": { "label": "Subdivision type 2", "description": "Additional subdivisions Can be State/Province, region, county.", "type": "string" }, "subdivision_type2": { "label": "Subdivision type 3", "description": "Additional subdivisions Can be State/Province, region, county.", "type": "string" }, "subdivision_type3": { "label": "Subdivision type 4", "description": "Additional subdivisions Can be State/Province, region, county.", "type": "string" }, "subdivision_type4": { "label": "Subdivision type 5", "description": "Additional subdivisions Can be State/Province, region, county.", "type": "string" }, "subdivision_type5": { "label": "Subdivision type 6", "description": "Additional subdivisions Can be State/Province, region, county.", "type": "string" }, "subdivision_type6": { "label": "Subdivision type 7", "description": "Additional subdivisions Can be State/Province, region, county.", "type": "string" }, "subdivision_name1": { "label": "Subdivision name 2", "description": "Use the name in text form, sample: 'Florida' or 'Florida'. Flag icons or flag templates can be used in this field per WP:MOSFLAG.", "type": "string", "example": "Connecticut" }, "subdivision_name2": { "label": "Subdivision name 3", "description": "Use the name in text form, sample: 'Florida' or 'Florida'. Flag icons or flag templates can be used in this field per WP:MOSFLAG..", "type": "string", "example": "Florida" }, "subdivision_name3": { "label": "Subdivision name 4", "description": "Use the name in text form, sample: 'Florida' or 'Florida'. Flag icons or flag templates can be used in this field per WP:MOSFLAG..", "type": "string", "example": "Utah" }, "subdivision_name4": { "label": "Subdivision name 5", "description": "Use the name in text form, sample: 'Florida' or 'Florida'. Flag icons or flag templates can be used in this field per WP:MOSFLAG..", "type": "string", "example": "California" }, "subdivision_name5": { "label": "Subdivision name 6", "description": "Use the name in text form, sample: 'Florida' or 'Florida'. Flag icons or flag templates can be used in this field per WP:MOSFLAG..", "type": "string", "example": "Vermont" }, "subdivision_name6": { "label": "Subdivision name 7", "description": "Use the name in text form, sample: 'Florida' or 'Florida'. Flag icons or flag templates can be used in this field per WP:MOSFLAG..", "type": "string", "example": "Wyoming" }, "established_title": { "label": "First establishment event", "description": "Title of the first establishment event", "type": "string", "example": "First settled" }, "established_date": { "label": "First establishment date", "type": "string", "description": "Date of the first establishment event" }, "established_title1": { "label": "Second establishment event", "description": "Tittle of the second establishment event", "type": "string", "example": "Incorporated as a town" }, "established_date1": { "label": "Second establishment date", "type": "string", "description": "Date of the second establishment event" }, "established_title2": { "label": "Third establishment event", "description": "Title of the third establishment event", "type": "string", "example": "Incorporated as a city" }, "established_date2": { "label": "Third establishment date", "type": "string", "description": "Date of the third establishment event" }, "established_title3": { "label": "Fourth establishment event", "type": "string", "description": "Title of the fourth establishment event", "example": "Incorporated as a county" }, "established_date3": { "label": "Fourth establishment date", "type": "string", "description": "Date of the fourth establishment event" }, "extinct_title": { "label": "Extinction event title", "description": "For when a settlement ceases to exist", "type": "string", "example": "Sack of Rome" }, "extinct_date": { "label": "Extinction date", "type": "string", "description": "Date the settlement ceased to exist" }, "founder": { "label": "Founder", "description": "Who the settlement was founded by", "type": "string" }, "named_for": { "label": "Named for", "description": "The source of the name of the settlement (a person, a place, et cetera)", "type": "string", "example": "Ho Chi Minh" }, "seat_type": { "label": "Seat of government type", "description": "The label for the seat of government (defaults to 'Seat').", "type": "string", "default": "Seat" }, "seat": { "label": "Seat of government", "description": "The seat of government.", "type": "string", "example": "White House" }, "parts_type": { "label": "Type of smaller subdivisions", "description": "The label for the smaller subdivisions (defaults to 'Boroughs').", "type": "string", "default": "Boroughs" }, "parts_style": { "label": "Parts style", "description": "Set to 'list' to display as a collapsible list, 'coll' as a collapsed list, or 'para' to use paragraph style. Default is 'list' for up to 5 items, otherwise 'coll'.", "type": "string", "example": "list" }, "parts": { "label": "Smaller subdivisions", "description": "Text or header of the list of smaller subdivisions.", "type": "string" }, "p1": { "label": "Smaller subdivision 1", "description": "The smaller subdivisions to be listed. Parameters 'p1' to 'p50' can also be used.", "type": "string" }, "government_footnotes": { "label": "Government footnotes", "description": "Reference(s) for government, placed within Cite error: Invalid <ref> tag; refs with no name must have content tags, possibly using the citing format at Lua error in Module:Citation/CS1 at line 2593: attempt to call field 'has_accept_as_written' (a nil value).", "type": "content" }, "government_type": { "label": "Government type", "description": "The place's type of government", "type": "string", "example": "Mayor–council government" }, "governing_body": { "label": "Governing body", "description": "Name of the place's governing body", "type": "wiki-page-name", "example": "Legislative Council of Hong Kong" }, "leader_party": { "label": "Leader political party", "description": "Political party of the place's leader", "type": "string" }, "leader_title": { "label": "Leader title", "description": "First title of the place's leader, e.g. Mayor", "type": "string", "example": "Governor" }, "leader_name": { "label": "Leader's name", "description": "Name of the place's leader", "type": "string", "example": "Jay Inslee" }, "leader_title1": { "label": "Leader title 1", "description": "First title of the place's leader, e.g. Mayor", "type": "string", "example": "Mayor" }, "leader_name1": { "label": "Leader name 1", "description": "Additional names for leaders. Parameters 'leader_name1' .. 'leader_name4' are available. For long lists use .", "type": "string" }, "total_type": { "label": "Total type", "description": "Specifies what total area and population figure refer to, e.g. 'Greater London'. This overrides other labels for total population/area. To make the total area and population display on the same line as the words Area and Population, with no Total or similar label, set the value of this parameter to ' '.", "type": "string" }, "unit_pref": { "label": "Unit preference", "description": "To change the unit order to 'imperial (metric)', enter 'imperial'. The default display style is 'metric (imperial)'. However, the template will swap the order automatically if the 'subdivision_name' equals some variation of the USA or the UK. For the middle east, a unit preference of dunam can be entered (only affects total area). All values must be entered in a raw format: no commas, spaces, or unit symbols. The template will format them automatically.", "type": "string", "example": "imperial" }, "area_footnotes": { "label": "Area footnotes", "description": "Reference(s) for area, placed within Cite error: Invalid <ref> tag; refs with no name must have content tags, possibly using the citing format at {Cite web}", "type": "string" }, "area_magnitude": { "label": "Area order of magnitude", "description": "Setting this to any non-empty value will create a link to the appropriate order of magnitude of area page (e.g. 1 E+6 m²).", "type": "string" }, "dunam_link": { "label": "Link dunams?", "description": "If dunams are used, the default is to link the word 'dunams' in the total area section. This can be changed by setting 'dunam_link' to another measure (e.g. 'dunam_link=water'). Linking can also be turned off by setting the parameter to something else (e.g. 'dunam_link=none' or 'dunam_link=off').", "type": "string", "example": "none" }, "area_total_km2": { "label": "Total area (km2)", "description": "Total area in square kilometers—symbol: km². Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_total_sq_mi is empty.", "type": "string" }, "area_total_sq_mi": { "label": "Total area (sq. mi)", "description": "Total area in square miles—symbol: sq mi. Value must be entered in 'raw format', no commas or spaces. Auto-converted to display square kilometers if area_total_km2 is empty.", "type": "string" }, "area_total_ha": { "label": "Total area (hectares)", "description": "Total area in hectares—symbol: ha. Value must be entered in 'raw format', no commas or spaces. Auto-converted to display acres if area_total_acre is empty.", "type": "string" }, "area_total_acre": { "label": "Total area (acres)", "description": "Total area in acres. Value must be entered in 'raw format', no commas or spaces. Auto-converted to display hectares if 'area_total_ha' is empty.", "type": "number" }, "area_total_dunam": { "label": "Total area (dunams)", "description": "Total area in dunams, which is wiki-linked. Used in Middle eastern places like Israel, Gaza, and the West Bank. Value must be entered in 'raw format', no commas or spaces. Auto-converted to display square kilometers or hectares and square miles or acres if area_total_km2, area_total_ha, area_total_sq_mi, and area_total_acre are empty. Examples: Gaza and Ramallah", "type": "number", "example": "69" }, "area_land_km2": { "label": "Land area (sq. km)", "description": "Land area in square kilometers—symbol: km^2. Value must be entered in 'raw format', no commas or spaces. Auto-converted to display square miles if 'area_land_sq_mi' is empty.", "type": "number" }, "area_land_sq_mi": { "label": "Land area (sq. mi)", "description": "Land area in square miles—symbol: sq mi. Value must be entered in 'raw format', no commas or spaces. Auto-converted to display square kilometers if 'area_land_km2' is empty.", "type": "number" }, "area_land_ha": { "label": "Land area (hectares)", "description": "The place's land area in hectares", "type": "number" }, "area_land_dunam": { "label": "Land area (dunams)", "description": "The place's land area in dunams", "type": "number" }, "area_land_acre": { "label": "Land area (acres)", "description": "The place's land area in acres", "type": "number" }, "area_water_km2": { "label": "Water area (sq. km)", "description": "Water area in square kilometers symbol: km^2. Value must be entered in 'raw format', no commas or spaces. Auto-converted to display square miles if 'area_water_sq_mi' is empty.", "type": "number" }, "area_water_sq_mi": { "label": "Water area (sq. mi)", "description": "Water area in square miles symbol: sq mi. Value must be entered in 'raw format', no commas or spaces. Auto-converted to display square kilometers if 'area_water_km2' is empty.", "type": "number" }, "area_water_ha": { "label": "Water area (hectares)", "description": "The place's water area in hectares", "type": "number" }, "area_water_dunam": { "label": "Water area (dunams)", "description": "The place's water area in dunams", "type": "number" }, "area_water_acre": { "label": "Water area (acres)", "description": "The place's water area in acres", "type": "number" }, "area_water_percent": { "label": "Percent water area", "description": "percent of water without the %.", "type": "number", "example": "21" }, "area_urban_km2": { "label": "Urban area (sq. km)", "type": "number", "description": "Area of the place's urban area in square kilometers" }, "area_urban_sq_mi": { "label": "Urban area (sq. mi)", "type": "number", "description": "Area of the place's urban area in square miles" }, "area_urban_ha": { "label": "Urban area (hectares)", "description": "Area of the place's urban area in hectares", "type": "number" }, "area_urban_dunam": { "label": "Urban area (dunams)", "description": "Area of the place's urban area in dunams", "type": "number" }, "area_urban_acre": { "label": "Urban area (acres)", "description": "Area of the place's urban area in acres", "type": "number" }, "area_urban_footnotes": { "label": "Urban area footnotes", "description": "Reference(s) for the urban area, placed within Cite error: Invalid <ref> tag; refs with no name must have content tags, possibly using the citing format at {Cite web}", "type": "string" }, "area_rural_km2": { "label": "Rural area (sq. km)", "type": "number", "description": "Area of the place's rural area in square kilometers" }, "area_rural_sq_mi": { "label": "Rural area (sq. mi)", "type": "number", "description": "Area of the place's rural area in square miles" }, "area_rural_ha": { "label": "Rural area (hectares)", "description": "Area of the place's rural area in hectares", "type": "number" }, "area_rural_dunam": { "label": "Rural area (dunams)", "description": "Area of the place's rural area in dunams", "type": "number" }, "area_rural_acre": { "label": "Rural area (acres)", "description": "Area of the place's rural area in acres", "type": "number" }, "area_rural_footnotes": { "label": "Rural area footnotes", "description": "Reference(s) for the urban area, placed within Cite error: Invalid <ref> tag; refs with no name must have content tags, possibly using the citing format at {Cite web}", "type": "string" }, "area_metro_km2": { "label": "Metropolitan area (sq. km)", "type": "number", "description": "Area of the place's metropolitan area in square kilometers" }, "area_metro_sq_mi": { "label": "Metropolitan area (sq. mi)", "type": "number", "description": "Area of the place's metropolitan area in square miles" }, "area_metro_ha": { "label": "Metropolitan area (hectares)", "description": "Area of the place's metropolitan area in hectares", "type": "number" }, "area_metro_dunam": { "label": "Metropolitan area (dunams)", "description": "Area of the place's metropolitan area in dunams", "type": "number" }, "area_metro_acre": { "label": "Metropolitan area (acres)", "description": "Area of the place's metropolitan area in acres", "type": "number" }, "area_metro_footnotes": { "label": "Metropolitan area footnotes", "description": "Reference(s) for the urban area, placed within Cite error: Invalid <ref> tag; refs with no name must have content tags, possibly using the citing format at {Cite web}", "type": "string" }, "area_rank": { "label": "Area rank", "description": "The settlement's area, as ranked within its parent sub-division", "type": "string" }, "area_blank1_title": { "label": "First blank area section title", "description": "Title of the place's first custom area section", "type": "string", "example": "see London" }, "area_blank1_km2": { "label": "Area blank 1 (sq. km)", "type": "number", "description": "Area of the place's first blank area section in square kilometers" }, "area_blank1_sq_mi": { "label": "Area blank 1 (sq. mi)", "type": "number", "description": "Area of the place's first blank area section in square miles" }, "area_blank1_ha": { "label": "Area blank 1 (hectares)", "description": "Area of the place's first blank area section in hectares", "type": "number" }, "area_blank1_dunam": { "label": "Area blank 1 (dunams)", "description": "Area of the place's first blank area section in dunams", "type": "number" }, "area_blank1_acre": { "label": "Area blank 1 (acres)", "description": "Area of the place's first blank area section in acres", "type": "number" }, "area_blank2_title": { "label": "Second blank area section title", "type": "string", "description": "Title of the place's second custom area section" }, "area_blank2_km2": { "label": "Area blank 2 (sq. km)", "type": "number", "description": "Area of the place's second blank area section in square kilometers" }, "area_blank2_sq_mi": { "label": "Area blank 2 (sq. mi)", "type": "number", "description": "Area of the place's second blank area section in square miles" }, "area_blank2_ha": { "label": "Area blank 2 (hectares)", "description": "Area of the place's third blank area section in hectares", "type": "number" }, "area_blank2_dunam": { "label": "Area blank 2 (dunams)", "description": "Area of the place's third blank area section in dunams", "type": "number" }, "area_blank2_acre": { "label": "Area blank 2 (acres)", "description": "Area of the place's third blank area section in acres", "type": "number" }, "area_note": { "label": "Area footnotes", "description": "A place for additional information such as the name of the source.", "type": "content", "example": "[1]" }, "dimensions_footnotes": { "label": "Dimensions footnotes", "description": "Reference(s) for dimensions, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}", "type": "content" }, "length_km": { "label": "Length in km", "description": "Raw number entered in kilometers. Will automatically convert to display length in miles if length_mi is empty.", "type": "string" }, "length_mi": { "label": "Length in miles", "description": "Raw number entered in miles. Will automatically convert to display length in kilometers if length_km is empty.", "type": "string" }, "width_km": { "label": "Width in kilometers", "description": "Raw number entered in kilometers. Will automatically convert to display width in miles if length_mi is empty.", "type": "number" }, "width_mi": { "label": "Width in miles", "description": "Raw number entered in miles. Will automatically convert to display width in kilometers if length_km is empty.", "type": "number" }, "elevation_m": { "label": "Elevation in meters", "description": "Raw number entered in meters. Will automatically convert to display elevation in feet if elevation_ft is empty. However, if a range in elevation (i.e. 5–50 m ) is desired, use the 'max' and 'min' fields below", "type": "number" }, "elevation_ft": { "label": "Elevation in feet", "description": "Raw number, entered in feet. Will automatically convert to display the average elevation in meters if 'elevation_m' field is empty. However, if a range in elevation (i.e. 50–500 ft ) is desired, use the 'max' and 'min' fields below", "type": "number" }, "elevation_footnotes": { "label": "Elevation footnotes", "description": "Reference(s) for elevation, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}", "type": "string" }, "elevation_min_point": { "type": "line", "label": "Point of min elevation", "description": "The name of the point of lowest elevation in the place", "example": "Death Valley" }, "elevation_min_m": { "label": "Minimum elevation (m)", "type": "number", "description": "The minimum elevation in meters" }, "elevation_min_ft": { "label": "Minimum elevation (ft)", "type": "number", "description": "The minimum elevation in feet" }, "elevation_min_rank": { "type": "line", "label": "Minimum elevation rank", "description": "The point of minimum elevation's rank in the parent region", "example": "1st" }, "elevation_min_footnotes": { "label": "Min elevation footnotes", "type": "content", "description": "Footnotes or citations for the minimum elevation" }, "elevation_max_point": { "type": "line", "label": "Point of max elevation", "description": "The name of the point of highest elevation in the place", "example": "Mount Everest" }, "elevation_max_m": { "label": "Maximum elevation (m)", "type": "number", "description": "The maximum elevation in meters" }, "elevation_max_ft": { "label": "Maximum elevation (ft)", "type": "number", "description": "The maximum elevation in feet" }, "elevation_max_rank": { "type": "line", "label": "Maximum elevation rank", "description": "The point of maximum elevation's rank in the parent region", "example": "2nd" }, "elevation_max_footnotes": { "label": "Max elevation footnotes", "type": "content", "description": "Footnotes or citations for the maximum elevation" }, "population_total": { "label": "Population total", "description": "Actual population (see below for estimates) preferably consisting of digits only (without any commas)", "type": "number" }, "population_as_of": { "label": "Population total figure's year", "description": "The year for the population total (usually a census year)", "type": "number" }, "population_footnotes": { "label": "Population footnotes", "description": "Reference(s) for population, placed within <ref> </ref> tags", "type": "content" }, "population_density_km2": { "label": "Population density (per square km)", "type": "string", "description": "The place's population density per square kilometer", "example": "auto" }, "population_density_sq_mi": { "label": "Population density (per square mi)", "type": "string", "description": "The place's population density per square mile", "example": "auto" }, "population_est": { "label": "Population estimate", "description": "Population estimate, e.g. for growth projections 4 years after a census", "type": "number", "example": "331000000" }, "pop_est_as_of": { "label": "Population estimate figure as of", "description": "The year or month & year of the population estimate", "type": "date" }, "pop_est_footnotes": { "label": "Population estimate footnotes", "description": "Reference(s) for population estimate, placed within <ref> </ref> tags", "type": "content", "example": "[2]" }, "population_urban": { "label": "Urban population", "type": "number", "description": "The place's urban population" }, "population_urban_footnotes": { "label": "Urban population footnotes", "description": "Reference(s) for urban population, placed within <ref> </ref> tags", "type": "content" }, "population_density_urban_km2": { "label": "Ubran population density (per square km)", "type": "string", "description": "The place's urban population density per square kilometer", "example": "auto" }, "population_density_urban_sq_mi": { "label": "Urban population density (per square mi)", "type": "string", "description": "The place's urban population density per square mile", "example": "auto" }, "population_rural": { "label": "Rural population", "type": "number", "example": "69,000", "description": "The place's rural population" }, "population_rural_footnotes": { "label": "Rural population footnotes", "description": "Reference(s) for rural population, placed within <ref> </ref> tags", "type": "content" }, "population_density_rural_km2": { "label": "Rural population density per sq. km", "type": "line", "description": "The place's rural population density per square kilometer", "example": "auto" }, "population_density_rural_sq_mi": { "label": "Rural population density per sq. mi", "type": "line", "description": "The place's rural population density per square mile", "example": "auto" }, "population_metro": { "label": "Metropolitan area population", "type": "string", "description": "Population of the place's metropolitan area" }, "population_metro_footnotes": { "label": "Metropolitan area population footnotes", "description": "Reference(s) for metro population, placed within <ref> </ref> tags", "type": "string" }, "population_density_metro_km2": { "label": "Metropolitan population density per sq. km", "type": "string", "description": "The place's metropolitan area's population density per square kilometer", "example": "auto" }, "population_density_metro_sq_mi": { "label": "Metropolitan population density per sq. mi", "type": "string", "description": "The place's metropolitan area's population density per square mile", "example": "auto" }, "population_rank": { "label": "Population rank", "description": "The settlement's population, as ranked within its parent sub-division", "type": "string" }, "population_density_rank": { "label": "Population density rank", "description": "The settlement's population density, as ranked within its parent sub-division", "type": "string" }, "population_blank1_title": { "label": "Custom population type 1 title", "description": "Can be used for estimates. Example: Windsor, Ontario", "type": "string", "example": "See: Windsor, Ontarioo" }, "population_blank1": { "label": "Custom population type 1", "description": "The population value for blank1_title", "type": "string" }, "population_density_blank1_km2": { "label": "Custom population type 1 density per sq. km", "type": "string", "description": "Population density per square kilometer according to the 1st custom population type" }, "population_density_blank1_sq_mi": { "label": "Custom population type 1 density per sq. mi", "type": "string", "description": "Population density per square mile according to the 1st custom population type" }, "population_blank2_title": { "label": "Custom population type 2 title", "description": "Can be used for estimates. Example: Windsor, Ontario", "type": "string", "example": "See: Windsor, Ontarioo" }, "population_blank2": { "label": "Custom population type 2", "description": "The population value for blank2_title", "type": "string" }, "population_density_blank2_km2": { "label": "Custom population type 2 density per sq. km", "type": "string", "description": "Population density per square kilometer according to the 2nd custom population type" }, "population_density_blank2_sq_mi": { "label": "Custom population type 2 density per sq. mi", "type": "string", "description": "Population density per square mile according to the 2nd custom population type" }, "population_demonym": { "label": "Demonym", "description": "A demonym or gentilic is a word that denotes the members of a people or the inhabitants of a place. For example a citizen in Liverpool is known as a Liverpudlian.", "type": "line", "example": "Liverpudlian" }, "population_note": { "label": "Population note", "description": "A place for additional information such as the name of the source. See Windsor, Ontario for example.", "type": "content" }, "demographics_type1": { "label": "Demographics type 1", "description": "A sub-section header", "type": "string", "example": "Ethnicities" }, "demographics1_footnotes": { "label": "Demographics section 1 footnotes", "description": "Reference(s) for demographics section 1, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}", "type": "content" }, "demographics1_title1": { "label": "Demographics section 1 title 1", "description": "Titles related to demographics_type1. For example: White, Black, Hispanic... Additional rows 'demographics1_title1' to 'demographics1_title5' are also available", "type": "string" }, "demographics_type2": { "label": "Demographics type 2", "description": "A second sub-section header", "type": "line", "example": "Languages" }, "demographics2_footnotes": { "label": "Demographics section 2 footnotes", "description": "Reference(s) for demographics section 2, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}", "type": "string" }, "demographics2_title1": { "label": "Demographics section 2 title 1", "description": "Titles related to demographics_type1. For example: English, French, Arabic... Additional rows 'demographics2_title2' to 'demographics1_title5' are also available", "type": "string" }, "demographics2_info1": { "label": "Demographics section 2 info 1", "description": "Information related to the titles. For example: 50%, 25%, 10%... Additional rows 'demographics2_info2' to 'demographics2_info5' are also available", "type": "content" }, "timezone1": { "label": "Timezone 1", "type": "string", "description": "The place's primary time-zone", "example": "Eastern Standard Time" }, "utc_offset": { "label": "UTC offset", "type": "string", "description": "The place's time-zone's offset from UTC", "example": "+8" }, "timezone_DST": { "label": "Timezone during DST", "type": "string", "description": "The place's time-zone during daylight savings time, if applicable", "example": "Eastern Daylight Time" }, "utc_offset_DST": { "label": "UTC offset during DST", "type": "string", "description": "The place's time-zone's UTC offset during daylight savings time, if applicable", "example": "+9" }, "utc_offset1": { "label": "UTC offset 1", "type": "string", "description": "The place's primary time-zone's offset from UTC", "example": "-5" }, "timezone1_DST": { "label": "Timezone 1 (during DST)", "type": "string", "description": "The place's primary time-zone during daylight savings time, if applicable", "example": "Eastern Daylight Time" }, "utc_offset1_DST": { "label": "UTC offset 1 (during DST)", "type": "string", "description": "The place's primary time-zone's UTC offset during daylight savings time, if applicable", "example": "-6" }, "timezone2": { "label": "Timezone 2", "description": "A second timezone field for larger areas such as a Province.", "type": "string", "example": "Central Standard Time" }, "utc_offset2": { "label": "UTC offset 2", "type": "string", "description": "The place's secondary time-zone's offset from UTC ", "example": "-6" }, "timezone2_DST": { "label": "Timezone 2 during DST", "type": "string", "description": "The place's secondary time-zone during daylight savings time, if applicable", "example": "Central Daylight Time" }, "utc_offset2_DST": { "label": "UTC offset 2 during DST", "type": "string", "description": "The place's secondary time-zone's offset from UTC during daylight savings time, if applicable", "example": "-7" }, "postal_code_type": { "label": "Postal code type", "description": "Label used for postal code info, e.g. 'ZIP Code'. Defaults to 'Postal code'.", "example": "Postal code", "type": "string" }, "postal_code": { "label": "Postal code", "description": "The place's postal code/zip code", "type": "string", "example": "90210" }, "postal2_code_type": { "label": "Postal code 2 type", "type": "string", "description": "If applicable, the place's second postal code type" }, "postal2_code": { "label": "Postal code 2", "type": "string", "description": "A second postal code of the place, if applicable", "example": "90007" }, "area_code": { "label": "Area code", "description": "The regions' telephone area code", "type": "string" }, "area_code_type": { "label": "Area code type", "description": "If left blank/not used template will default to 'Area code(s)'", "type": "string" }, "geocode": { "label": "Geocode", "description": "See Geocode", "type": "string" }, "iso_code": { "label": "ISO 3166 code", "description": "See ISO 3166", "type": "string" }, "registration_plate": { "label": "Registration/license plate info", "description": "See Vehicle registration plate", "type": "string" }, "blank_name_sec1": { "label": "Blank name section 1", "description": "Fields used to display other information. The name is displayed in bold on the left side of the infobox.", "type": "string" }, "blank_info_sec1": { "label": "Blank info section 1", "description": "The information associated with the \"blank_name_sec1\" heading. The info is displayed on right side of infobox, in the same row as the name. For an example, see: Warsaw", "type": "content" }, "blank1_name_sec1": { "label": "Blank 1 name section 1", "description": "Up to 7 additional fields 'blank1_name_sec1' ... 'blank7_name_sec1' can be specified", "type": "string" }, "blank1_info_sec1": { "label": "Blank 1 info section 1", "description": "Up to 7 additional fields 'blank1_info_sec1' ... 'blank7_info_sec1' can be specified", "type": "content" }, "blank_name_sec2": { "label": "Blank name section 2", "description": "For a second section of blank fields", "type": "string" }, "blank_info_sec2": { "label": "Blank info section 2", "example": "Beijing", "type": "content", "description": "The information associated with the \"blank_name_sec2\" heading. The info is displayed on right side of infobox, in the same row as the name. For an example, see: Warsaw" }, "blank1_name_sec2": { "label": "Blank 1 name section 2", "description": "Up to 7 additional fields 'blank1_name_sec2' ... 'blank7_name_sec2' can be specified", "type": "string" }, "blank1_info_sec2": { "label": "Blank 1 info section 2", "description": "Up to 7 additional fields 'blank1_info_sec2' ... 'blank7_info_sec2' can be specified", "type": "content" }, "website": { "label": "Official website in English", "description": "External link to official website, Use the {{URL|example.com|optional display text}} template, thus: example.com", "type": "string" }, "footnotes": { "label": "Footnotes", "description": "Text to be displayed at the bottom of the infobox.", "type": "content" }, "translit_lang1_info1": { "label": "Language 1 first transcription ", "description": "Transcription of type 1 in the first other language", "example": "森美兰", "type": "line" }, "translit_lang1_type1": { "label": "Language 1 first transcription type", "description": "Type of transcription used in the first language's first transcription", "example": "Chinese", "type": "line" }, "translit_lang1_info2": { "label": "Language 1 second transcription ", "description": "Transcription of type 1 in the first other language", "example": "நெகிரி செம்பிலான்", "type": "line" }, "translit_lang1_type2": { "label": "Language 1 second transcription type", "description": "Type of transcription used in the first language's first transcription", "example": "Tamil", "type": "line" }, "demographics1_info1": { "label": "Demographics section 1 info 1", "description": "Information related to the titles. For example: 50%, 25%, 10%... Additional rows 'demographics1_info1' to 'demographics1_info5' are also available", "type": "content" } }, "format": "Template:\n\n" } </templatedata>

Calls and redirects[edit]

At least 0 other templates call this one.

Several templates redirect here, but the only redirect in article space is Template:Infobox Settlement having around 6700 transclusions, oldest article from 2008, most recent from 2009. More than 5000 of these articles are bot generated and related to Poland. [1]

Tracking categories[edit]

  1. Category:Pages using infobox settlement with a dot map (0)
  2. Category:Pages using infobox settlement with bad settlement type (1)
  3. Category:Pages using infobox settlement with imprecise region codes (0)
  4. Category:Pages using infobox settlement with missing country (0)
  5. Category:Pages using infobox settlement with possible area code list (0)
  6. Category:Pages using infobox settlement with possible demonym list (0)
  7. Category:Pages using infobox settlement with possible motto list (0)
  8. Category:Pages using infobox settlement with possible nickname list (0)
  9. Category:Pages using infobox settlement with the image parameter (0)
  10. Category:Pages using infobox settlement with the wikidata parameter (0)
  11. Category:Pages using infobox settlement with unknown parameters (2)
  12. Category:Templates calling Infobox settlement (0)


  1. ^ Lua error in Module:Citation/CS1 at line 2593: attempt to call field 'has_accept_as_written' (a nil value).
  2. ^ Cite error: Invalid <ref> tag; no text was provided for refs named \"USCensusEst2016\"